Catalogs >
ISOLTEMA GROUP >
GROUND / BELOW GRADE WATERPROOFING

GROUND / BELOW GRADE WATERPROOFING
4Pages

Catalog excerpts

GROUND / BELOW GRADE WATERPROOFING Waterproofing Membranes Self-Adhesive Waterproofing Bituminous Membranes for Ground / Below Grade Applications. THE PRODUCT This Waterproofing products range consists of three selfadhesive self-sealing waterproofing bituminous membranes, designed and developed for foundations and underground structures waterproofing. The membranes are composed of a bituminous compound modified with synthetic rubbers and high tack resins, giving to the product excellent adhesive self-sealing and waterproofing characteristics. The compound is coated on different films or synthetic materials, in order to fit the user specific requests in terms of mechanical features and applications. Depending on the film and the compound, each product has different characteristics: • Elotene 3000X: waterproofing membrane for foundations and Radon and Methane gas barrier, tough and extensible; • Elotene DSX: Total Vapour, Radon and Methane Gas Barrier for composite multilayer waterproofing; • Elotene HD: self-adhesive membrane protected by an Heavy Duty Polypropylene mesh resistant to high breaking loads. USES Compatible with most building and industrial materials, these bituminous membranes are used for waterproofing of foundations, technological underground premises, cellars, underground garages. Thanks to their self-adhesive characteristic, the membranes are suitable for use where hot application techniques are not permitted or inappropriate. * The product dimensions may vary within defined ranges because of the product characteristics and its manufacturing process. For further information please visit www.isoltemagroup.com

Open the catalog to page 1

BELOW GRADE Polyester Reinforced REINFORCE LAYER MAIN FEATURE Cross Laminated HDPE Radon, Methane Radon, Methane Barrier Total Barrier It withstands the contact with Very High breaking loads Tab. 1 - Membranes main Features GENERAL FEATURES The three membranes constituting the EloteneWaterproofing family for Ground / Below Grade applications have specific characteristics that make them suitable for different needs: Elotene 3000X is a membrane protected with a cross laminated HDPE film, developed for foundations and vertical underground walls waterproofing and for every application where...

Open the catalog to page 2

BELOW GRADE CHARACTERISTICS TECHNICAL DATA Vapour Transmission Rate [µ] Shear Resistance of Joints [N/50mm] Peel Resistance of Joints [N/50mm] SP Swedish Nat. Testing & Research Institute Service Temp. Range [°C] Application Temp. Range [°C] TEST Classification for transport: Not Applicable. Reaction to fire: E (EN 13501 - 1). Tab. 2 - Membranes Technical Data DIMENSIONS Standard Length* [m] Standard Thickness* [mm] Standard Width* [mm] Other lengths and thicknesses are available on request. The rolls are packed individually in cardboard boxes and placed on pallets. The Ground / Below Grade...

Open the catalog to page 3

BELOW GRADE Protection Board Elotene Waterproofing Membrane Elotene Waterproofing Membrane Fig. 3 - Malta Fort Cambridge Tower waterproofing with Elotene 3000X THE MATERIALS ARE NOT HAZARDOUS FOR NORMAL USES AND WHEN USED BY SKILLED PERSONS. IN PARTICULAR CONDITIONS, IT IS POSSIBLE TO CUT OR INJURE ONESELF. KEEP OUT OF REACH OF CHILDREN. FOR FURTHER INFORMATION REFER TO THE SAFETY DATA SHEET. THE MANUFACTURER LIMITS HIS LIABILITY TO THE USES AND APPLICATIONS DESCRIBED IN THIS DOCUMENT. BITUMEN AND BUTYL SEALANTS ARE DEFORMABLE PLASTIC PRODUCTS. DO NOT USE FOR PERMANENT FIXINGS OR IN LOAD...

Open the catalog to page 4

GROUND / BELOW GRADE WATERPROOFING 4Pages

Catalog excerpts

All ISOLTEMA GROUP catalogs and brochures

GROUND / BELOW GRADE WATERPROOFING
4Pages