Mouldable & Flexible ELOTENE TUBI 130 - BITUMEN COMPOUND Elotene Tubi Anti-Corrosive Self-Adhesive Bitumen Tape Elotene TUBI 130 bitumen compound is a self-adhesive tape made of a 130 µm LDPE Polyethilene U.V. stabilized slightly contracting film, covered by an adhesive bitumenmodified compound. It has been designed for the anti-corrosive and dielectric lining of underground pipes, for the protection of welded steel pipe joints and for the sealing/bonding of membrane joints. FEATURES • Cold Applied; • Excellent Dielectric Resistance; • Good Flexibility; • Good Mechanical Protection; • Self-Amalgamating. USES • Dielectric and anti-corrosive coating of underground steel pipes; • Dielectric and mechanical features replacement of welding points of steel pipes to lay underground; • Dielectric and mechanical features and anti-corrosive coating replacement due to lay underground pipe networks maintenance. * The product dimensions may vary within defined ranges because of the product characteristics and its manufacturing process. For further information please visit www.isoltemagroup.com

ELOTENE TUBI 130 BITUMEN COMPOUND TECHNICAL DATA Total Thickness Film Thickness Dielectric Strength Compression Resistance Application Temperature Service Temperature Compound Thickness Tensile Strength * For temperatures below 5 °C, it is recommended to use special and additional precautions to facilitate adhesion (for example a specific primer for low temperatures). TEST REPORTS Classification for transport: Not Applicable Total Volatile Organic Compound emissions (TVOC): 8 µg/m3 (ISO 16000-6) Standard length: 10 / 15 m *. Standard thicknesses: 1.5 mm *. Standard widths: 5 / 7.5 / 10 / 15 /20/25...