Hard & Tough ELOTENE TUBI 100 HDPE - BUTYL COMPOUND Elotene Tubi Self-adhesive butyl tape for waterproofing and anti-corrosive coatings Elotene TUBI 100 HDPE butyl compound is a self-adhesive tape made of a 100 µm HDPE Polyethylene cross-laminated Valéron® film covered by an adhesive butyl compound. The tape has been designed for the waterproofing and anti-corrosive coatings. • Waterproofing of foundations and applications not compatible with the use of free fire flames; • Cold Applied; • Good Mechanical Characteristics; • Excellent Dielectric Resistance; • Good Flexibility; • Self-Amalgamating. • Dielectric and anti-corrosive coating of underground steel pipes. DIMENSIONS AND PACKAGING Standard length: 15 m *. Standard thicknesses: 0.8 / 1.0 mm *. Standard widths: 5/7.5/10/15/20/22.5/30/45/100 cm *. Other widths, lengths and thicknesses are available on request. Less than one metre wide rolls are individually packed in shrink-wrap, placed in boxes and packed on pallets. * The product dimensions may vary within defined ranges because of the product characteristics and its manufacturing process. For further information please visit www.isoltemagroup.com

ELOTENE TUBI 100 HDPE BUTYL COMPOUND TECHNICAL DATA Total Thickness Film Thickness Tear Resistance Impact resistance Penetration resistance Total Elongation at break Application Temperature Compound Thickness Tensile Strength Sliding Resistance Service Temperature TEST REPORTS Classification for transport: Not Applicable Total Volatile Organic Compound emissions (TVOC): 30 µg/m3 (ISO 16000-6) * Statement on level of emission of volatile substances in indoor air posing a toxic threat during inhaling - on a scale from A+ (very low-emission) to C (highemission). SURFACE PREPARATION The sealing tape...