ELOTENE TUBI 100 HDPE - BITUMEN COMPOUND Elotene Tubi Self-adhesive bitumen tape for waterproofing and anti-corrosive coatings Elotene TUBI 100 HDPE bitumen compound is a selfadhesive tape made of a 100 µm HDPE Polyethylene crosslaminated Valéron® film covered by an adhesive bitumen compound. The tape has been designed for the waterproofing and anti-corrosive coatings. • Waterproofing of foundations and applications not compatible with the use of free fire flames; • Dielectric and anti-corrosive coating of underground steel pipes. • Cold Applied; • Good Mechanical Characteristics; • Excellent Dielectric Resistance; • Good Flexibility; • Self-Amalgamating. Standard length: 10 m *. Standard thicknesses: 1.5 mm *. Standard widths: 5 / 7.5 / 10 / 15 / 20 / 25 cm *. Other widths, lengths and thicknesses are available on request. The rolls are individually packed in shrink-wrap, placed in boxes and packed on pallets. * The product dimensions may vary within defined ranges because of the product characteristics and its manufacturing process. For further information please visit www.isoltemagroup.com

ELOTENE TUBI 100 HDPE BITUMEN COMPOUND TECHNICAL DATA Total Thickness Film Thickness Tear Resistance Impact resistance Penetration resistance Compound Thickness Tensile Strength Sliding Resistance Total Elongation at break Application Temperature Service Temperature * For temperatures below 5 °C, it is recommended to use special and additional precautions to facilitate adhesion (for example a specific primer for low temperatures). TEST REPORTS Classification for transport: Not Applicable Total Volatile Organic Compound emissions (TVOC): 8 µg/m3 (ISO 16000-6) SURFACE PREPARATION The surface must...