1. Catalogs
  2. ISOLTEMA GROUP
  3. ELOTENE DSN 800

ELOTENE DSN 800

ELOTENE DSN 800

ELOTENE DSN 800

Product catalog summary
Description
Elotene DSN 800 is a self-adhesive bituminous waterproofing membrane designed to provide a total barrier against vapour. It features a low-thickness bituminous compound reinforced with aluminium foil and a fibreglass net, making it suitable for high mechanical stress applications.

Characteristics
  • Total vapour barrier
  • Compatible with most polyurethane adhesives
  • Excellent tensile strength
  • Waterproof and self-adhesive
  • Self-sealing and cold applied without flames

Uses
  • Vapour barrier for metal deck applications
  • Vapour barrier for composite multilayer insulation systems
  • Carrier membrane for composite multilayer insulation systems

Dimensions and Packaging
Standard dimensions include lengths of 40 m, thickness of 0.6 mm, and width of 1080 mm. Custom sizes are available upon request. Rolls are individually packed in cardboard boxes and placed on pallets.

Surface Preparation
Surfaces must be dry, clean, smooth, and free of impurities. A primer is recommended for porous surfaces, applied at 75-150 g/sqm.

Application
The membrane should be applied perpendicular to the slope with overlaps of 5-8 cm at edges and 15 cm at the top. It should be protected from UV rays within one to two weeks post-installation.

Storage
The product should be stored in its original packaging in a dry, well-ventilated area at temperatures between +5 °C and +40 °C. It is recommended to use the product within 12 months of production.

Technical Characteristics
  • Thickness: 0.6 mm
  • Tensile Strength: 800 N/50 mm
  • Elongation at Break: 5%
  • Tear Resistance: 200 N
  • Peel Resistance of Joints: 50 N/50 mm
  • Shear Resistance of Joints: 400 N/50 mm
  • Impermeability: Pass (≥ 60 Kpa)
  • Water Vapour Impermeability: Pass (Sd ≥ 1500 m)
  • Application Temperature: 0 °C to +30 °C
  • Service Temperature: -30 °C to +80 °C

Compliance and Safety
The product complies with EN 13969 type A and T, EN 13970, and EN 13707 standards. It is classified as non-hazardous for normal use but should be kept out of reach of children. The product is sensitive to solvents, and compatibility with surfaces should be checked prior to application.
See more

Catalog excerpts

ELOTENE DSN 800-1

COMPATIBLE WITH MOST PU ADHESIVES Waterproofing Membranes ELOTENE DSN 800 Self-Adhesive Bituminous Reinforced Membrane Total Vapour Barrier for Roof Application. Elotene DSN 800 is a self-adhesive bituminous waterproofing membrane that forms a total barrier against vapour. The product consists of a self-adhesive low-thickness bituminous compound, self-protected by a reinforced aluminium foil and a fibreglass net. The so composed film makes the membrane resistant to heavy worksite traffic and suitable for applications that involve high mechanical stresses. Standard Lengths: 40 m * Standard Thicknesses: 0.6 mm * Standard Width: 1080 mm * Other lengths and thicknesses are available on request. The rolls are packed individually in cardboard boxes and placed on pallets. • Total Vapour Barrier; • Provides a surface on which most polyurethane adhesives will adhere strongly; • Excellent tensile strength; • Waterproof & Self-adhesive; • Self-sealing; • Cold applied without use of flames. SURFACE PREPARATION All surfaces on which Elotene Waterproofing membranes have to be installed must be dry, clean, smooth and free of impurities. If the surface is porous, apply a coat of Primer in a quantity of 75 - 150 g/sqm. The use of Primer is in any case advisable, and the manufacturers instructions must be followed. A wrong use of Primer can influence the membrane efficiency. • Total Vapour Barrier for metal deck application; • Total Vapour Barrier for composite multilayer insulation systems; • Carrier membrane for composite multilayer insulation systems. * The product dimensions may vary within defined ranges because of the product characteristics and its manufacturing process. For further information please visit www.isoltemagroup.com

 Open the catalog to page 1
ELOTENE DSN 800-2

TECHNICAL DATA Peel Resistance of Joints Shear Resistance of Joints Application Temperature Service Temperature Thickness Tensile Strength Elongation at Break Tear Resistance Impermeability Water Vapour Impermeability * For temperatures below 5 °C, it is recommended to use special and additional precautions to facilitate adhesion (for example a specific primer for TEST Complying with: EN 13969 type A and T; EN 13970; EN 13707 Classification for transport: Not Applicable Reaction to fire: E (EN 13501 - 1) Total Volatile Organic Compound emissions (TVOC): 8 µg/m3 (ISO 16000-6) Insulation Panel...

 Open the catalog to page 2

All ISOLTEMA GROUP catalogs and brochures

  1. RESY AC

    2  Pages

  2. ELOTENE FG50

    2  Pages

  3. ELOTENE DS

    2  Pages

  4. ELOTENE 3000X

    2  Pages

  5. ELOTENE HD

    2  Pages

  6. ELOTENE DSX

    2  Pages

  7. EKOBIT

    2  Pages

  8. Butyl Drums

    6  Pages

Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.