*mynauticexpo

ELOTENE DS

Product catalog summary

Description
Elotene DS is a self-adhesive bituminous waterproofing membrane designed to provide a total barrier against water vapour. It features a self-sealing bituminous compound with a reinforced aluminium film, making it resistant to work site traffic and compatible with most construction materials. It is suitable for all roof applications.

Characteristics

Reinforced aluminium film protection
Total vapour barrier
Waterproof and self-adhesive
Self-sealing
Cold applied without flames

Uses
Primarily used as a total vapour barrier for composite multilayer insulation systems.

Dimensions and Packaging

Standard Length: 25 m
Standard Thickness: 1.2 mm
Standard Width: 1000 mm

Other sizes available upon request. Rolls are individually packed in cardboard boxes and placed on pallets.

Surface Preparation
Surfaces must be dry, clean, smooth, and free of impurities. For porous surfaces, apply a primer (75 - 150 g/sqm). Incorrect primer use can affect membrane efficiency.

Application
Apply the membrane perpendicular to the slope, overlapping edges by 5-8 cm and tops by 15 cm. Ensure proper pressing, especially at corners and overlaps.

Storage
Store in original packaging in a dry, ventilated place at temperatures between +5 °C and +40 °C. Use within 12 months of production. Avoid storage above 50 °C.

Technical Data

Thickness: 1.2 mm (EN 1849-1)
Tensile Strength: Long. 185 N/50 mm, Trans. 200 N/50 mm (EN 12311-1)
Elongation at Break: Long. 10%, Trans. 20% (EN 12311-1)
Static Load Resistance: Met. A 15 Kg, Met. B 20 Kg (EN 12730)
Tear Resistance: Long. 45 N, Trans. 45 N (EN 12310-1)
Peel Resistance of Joints: 50 N/50 mm (EN 12316-1)
Shear Resistance of Joints: Long. 230 N/50 mm, Trans. 270 N/50 mm (EN 12317-1)
Impermeability: Pass (≥ 60 Kpa) (EN 1928)
Water Vapour Impermeability: Pass (Sd ≥ 1500 m) (ISO EN 12572)
Application Temperature: +5 °C to +35 °C
Service Temperature: -30 °C to +80 °C

Compliance
Complies with EN 13969 type A e T, EN 13970, EN 13707. Classified as non-hazardous for transport and has a reaction to fire rating of E (EN 13501-1). Total Volatile Organic Compound emissions are 8 µg/m3 (ISO 16000-6).

Catalog excerpts

Waterproofing Membranes ELOTENE DS Self-Adhesive Bituminous Membrane Total Vapour Barrier for Roof Application. Elotene DS is a self-adhesive bituminous waterproofing membrane that forms a total barrier against water vapour. It consists of a self-adhesive and self-sealing bituminous compound with a reinforced aluminium film on the surface. The polyester reinforced aluminium makes the membrane resistant to work site traffic. The product is not affected at all by ageing and is compatible with most of construction and industrial materials. Elotene DS is suitable for all Roof Applications. Standard Length: 25 m *; Standard Thickness: 1.2 mm *; Standard Width: 1000 mm *. Other lengths and thicknesses are available on request. The rolls are packed individually in cardboard boxes and placed on pallets. • Protected by reinforced aluminium film • Total Vapour Barrier • Waterproof and Self-Adhesive • Self-sealing • Cold applied without use of flames SURFACE PREPARATION All surfaces on which Elotene Waterproofing membranes have to be installed must be dry, clean, smooth and free of impurities. If the surface is porous, apply a coat of Primer in a quantity of 75 - 150 g/sqm. The use of Primer is in any case advisable, and the manufacturers instructions must be followed. A wrong use of Primer can influence the membrane efficiency. • Total Vapour Barrier for composite multilayer insulation systems. * The product dimensions may vary within defined ranges because of the product characteristics and its manufacturing process. For further information please visit www.isoltemagroup.com

Open the catalog to page 1

TECHNICAL DATA Peel Resistance of Joints Shear Resistance of Joints Application Temperature Service Temperature Thickness Tensile Strength Elongation at Break Static Load Resistance Tear Resistance Impermeability Water Vapour Impermeability TEST Complying with: EN 13969 type A e T; EN 13970; EN 13707 Classification for transport: Not Applicable Reaction to fire: E (EN 13501 - 1) Total Volatile Organic Compound emissions (TVOC): 8 µg/m3 (ISO 16000-6) The quality and the characteristics of the materials remain unaltered for a long period of time. However, it is recommended to use the product within...

Open the catalog to page 2

ELOTENE DS

ELOTENE DS

Catalog excerpts

All ISOLTEMA GROUP catalogs and brochures