Flashing Tapes Self-Adhesive Sealing Tape Protected by Aluminium Film EKOBIT is a bituminous self-adhesive waterproofing tape protected by a metal foil in aluminium, natural or coloured, reinforced with a polyester layer. EKOBIT is highly adhesive to all common building materials. The adhesive bituminous compound is protected, until use, by a silicone release film. FEATURES • Tear-resistant; • Cold applied; • Waterproof and self-sealing; • Resistant to ageing and to UV-rays; • Solvent-free. • For protecting: metal, plastic, asbestos cement, roofs and coverings in general. • For sealing: frames and skylights, parapets, glass and plastic structures. • For repairing: tiles, gutters, metal pipes, metal plate or asbestos cement roofs. DIMENSIONS AND PACKAGING Standard length: 10 m *. Standard thicknesses: 1.5 mm *. Standard widths: 5/7.5/10/15/20/22.5/30/45/50/100 cm *. Other widths, lengths and thicknesses are available on request. Less than one meter wide rolls are individually packed in shrink-wrap, placed in boxes and packed on pallets. * The product dimensions may vary within defined ranges because of the product characteristics and its manufacturing process. For further information please visit www.isoltemagroup.com

TECHNICAL DATA Application Temperature Service Temperature range Thickness Tensile Strength Elongation at Break TEST REPORTS Classification for transport: Not Applicable Reaction to fire: E (EN 13501 - 1) Total Volatile Organic Compound emissions (TVOC): 8 µg/m3 (ISO 16000-6) SURFACE PREPARATION EKOBIT adheres and is compatible with most building materials. No special tools are required to install EKOBIT tapes, a sharp knife and a pressing roller will be enough. The surfaces on which to install the EKOBIT tapes must be dry and compact, clean and free of impurities. If the installation surface...