1. Catalogs
  2. ISOLTEMA GROUP
  3. BU-TYLENE FLEECE PRO | NTA PRO

BU-TYLENE FLEECE PRO | NTA PRO

BU-TYLENE FLEECE PRO | NTA PRO

BU-TYLENE FLEECE PRO | NTA PRO

Product catalog summary
Description
Bu-tylene Fleece PRO is a self-adhesive sealing tape or pad made from a butyl rubber adhesive compound, protected by a Polypropylene Fleece. It features an easy peel siliconized release liner and is designed for high adhesion on materials like concrete, plaster boards, or ceramic. It is compatible with common glues and ideal for use under wood and ceramic coverings. The product is highly adhesive even at low temperatures and is compatible with most bitumen. It must be protected from UV rays.

Features
  • Excellent adhesive properties
  • High workability and deformability
  • Cold applied
  • Excellent adhesion at low temperatures
  • Waterproof and self-sealing
  • Excellent heat stability
  • Easy peel
  • No oil migration
  • Solvent-free

Technical Data
  • Film Type/Colour: Polypropylene Fleece/White
  • Compound Type/Colour: Butyl Rubber Adhesive/Grey
  • Standard Thickness: 1.0 mm
  • Tensile Strength: Long. 115 N/50 mm | Trans. 100 N/50 mm
  • Elongation at Break: Long. 100% | Trans. 100%
  • 180° Peel Adhesion: 22 N/cm
  • Probe Tack: 7.2 N
  • Vertical Flow: 0 mm
  • Application Temperature Range: 0 °C / + 40 °C
  • Service Temperature Range: - 40 °C / + 100 °C

Uses
Bu-tylene Fleece PRO is designed to seal joints between floor slabs and walls and can be used for sealing and joining most common building materials. It is easy to use in small spaces.

Dimensions and Packaging
  • Rolls: Standard length 15 m, thickness 1.0 mm
  • Pads: Standard length and width 320/400 mm, thickness 1.0 mm
  • Various widths available
  • Packaged in boxes

Surface Preparation
The surface must be clean, dry, smooth, and dust-free. For temperatures between 0 °C and 5 °C, ensure no frost or condensation is present. Stabilize porous surfaces if necessary.

Application
Remove the release liner and position the tape or pad. Roll-press to avoid air bubbles. Overlap at least 5 cm when connecting two tapes or pads. Protect from UV-rays within a few weeks.

Storage
Store in original packaging in a dry, well-ventilated place at temperatures between +5 °C and +40 °C. Use within 12 months from production date. Storage above 50 °C may cause difficulties in removing the release liner.
See more

Catalog excerpts

BU-TYLENE FLEECE PRO | NTA PRO-1

FINGER LIFT FOR EASY PEEL Sealing & Adhesive Products Self-Adhesive Butyl Sealing Tape and Pad with Polypropylene Fleece and Easy Peel Release DESCRIPTION Bu-tylene Fleece PRO is a self-adhesive sealing tape or a pad consisting of a butyl rubber adhesive compound, protected by a Polypropylene Fleece. Bu-tylene Fleece PRO is characterized by the easy peel siliconized release liner. Bu-tylene Fleece PRO has been developed for applications where it is both necessary to have a high adhesion property on materials such as concrete, plaster boards or ceramic and featuring a smooth, absorbing surface. The Non Woven Fleece allows the tape to seal and conform over the joint. Bu-tylene Fleece PRO is compatible with common glues (cement and non-cement based adhesives) and is ideal for use under wood, ceramic coverings. Bu-tylene Fleece PRO is highly adhesive, even at low temperatures, to all materials and especially to plastic, glass, steel, polycarbonate and wood. Compatible with most of the bitumen present on the market. The product must be protected from UV rays. Bu-tylene Fleece PRO is available in tape or pad with various sizes for multipurpose applications. • Excellent adhesive properties; • High workability and deformability; • Cold applied; • Excellent adhesion at low temperatures; • Waterproof and self-sealing; • Excellent heat stability; • Easy peel; • No oil migration; • Solvent-free. * The product dimensions may vary within defined ranges because of the product characteristics and its manufacturing process. For further information please visit www.isoltemagroup.com

 Open the catalog to page 1
BU-TYLENE FLEECE PRO | NTA PRO-2

TECHNICAL DATA Film Type / Colour Polypropylene Fleece / White Compound Type / Colour Butyl Rubber Adhesive / Grey Standard Thickness Probe Tack Vertical Flow Tensile Strength Elongation at Break Solids 180° Peel Adhesion Application Temperature Range Service Temperature Range TEST REPORT * Statement on level of emission of volatile substances in indoor air posing a toxic threat during inhaling - on a scale from A+ (very low-emission) to C (highemission). Bu-tylene Fleece PRO has been designed to seal joints between the floor slab and wall (brick, breezeblock, plaster or plaster board). Bu-tylene...

 Open the catalog to page 2

All ISOLTEMA GROUP catalogs and brochures

  1. RESY AC

    2  Pages

  2. ELOTENE FG50

    2  Pages

  3. ELOTENE DS

    2  Pages

  4. ELOTENE 3000X

    2  Pages

  5. ELOTENE HD

    2  Pages

  6. ELOTENE DSX

    2  Pages

  7. EKOBIT

    2  Pages

  8. Butyl Drums

    6  Pages

Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.