Introduction
The document provides technical specifications and applications for ALUCELL panels of the ALU series, which are manufactured in Italy. These panels are used in various sectors including ship transport, public transport, furniture, and flooring.

Specifications
ALUCELL panels are characterized by their aluminum honeycomb core and are coated with primer-coated, anodized, or pre-painted aluminum sheets. The primer-coated sheets allow for additional finishes such as HPL plastic laminate, varnishes, leathers, and carpets. The panels offer a good performance-to-cost ratio and are used for interior walls, false ceilings, floors, and furniture elements.

Certifications
The panels are certified as materials with limited flame spread according to directive MED 96/98/CE. They can also be used to create certified Class C bulkheads when combined with an appropriate extruded profile system.

Applications
ALUCELL panels are suitable for floors, ceilings, furniture, exterior and interior separation walls, vehicle construction, exterior facade cladding, doors, ship interiors, and mobile platforms or elevators.

Mechanical Properties
The panels exhibit excellent chemical resistance, resistance to atmospheric agents, bending, shear, and tensile stresses. They are easy to work with using common tools for aluminum or wood and offer excellent flatness and dimensional stability. They also have good resistance to paint systems within hot air ovens at 180°C.

Product Code
Each ALUCELL panel is identified by an alphanumeric code that specifies the thickness and finish of the front and back sheets, as well as the honeycomb cell diameter.

Disclaimer
The data provided is based on the best knowledge of ISOLEADER SRL. Users should verify the product's validity for their specific requirements. ISOLEADER SRL assumes no liability for the data and reserves the right to modify the product without notice.