Specifications
The IOW 032 N2/L2 Mechline pump has a flow volume ranging from 21.6 to 95.2 liters per minute (5.7 to 25.1 gallons per minute) and can handle a maximum differential pressure of 16 Bar (232 psi). The pump is powered by an electric motor via a flexible coupling, and the fluid is enclosed using a shaft seal. It includes an internal pressure relief valve for protection. Two types of shaft seals are available based on the temperature of the pumped liquid, and two rotor leads are available depending on performance requirements. The fluid viscosity ranges from 1.4 to 800 cSt for L and 1.4 to 3500 cSt for H, with a fluid temperature range of -20 to +155°C (-4 to +311°F). The maximum RPM is 3600.
Performance Data
The pump's performance varies with RPM, with specific flow rates and power consumption detailed for different RPMs. For example, at 1470 RPM, the flow rate is 35 LPM (9.2 GPM) with a power consumption of 0.7 kW, while at 3550 RPM, the flow rate is 95.2 LPM (25.1 GPM) with a power consumption of 2.5 kW.
Temperature and Seal Information
The shaft seals have different temperature ranges: L type operates from -20°C (-4°F) to 90°C (194°F), and H type operates from -20°C (-4°F) to 155°C (311°F).
Installation Recommendations
The recommended pipe diameter is 1-1/2” for the inlet and 1” for the outlet. The pump can be mounted horizontally or vertically, and an angle bracket aids in mounting.
Advantages
The pump is designed for long, problem-free operation, is self-lubricating, and can handle various liquids. It can be approved by multiple classification societies, offers same-day dispatch on spares, and is environmentally friendly.
Applications
The pump is suitable for supplying fuel and lubrication to diesel engines, transferring oil in refineries, tank farms, and on board ships. It is also used in large machines, hydraulic systems, transformer oils, and for lubricating gears, hydro turbines, steam or gas turbines, and paper machines.
See more