Schooner Varnishes Premium High Gloss Varnish with UV Protection. PRODUCT DESCRIPTION Schooner is a traditional tungoil based gloss yacht varnish for classic yachts. Suitable for use on all types of wood including oily timbers such as Teak and Iroko. It contains UV filters to screen the sun's damaging rays for remarkable durability. * Easy application * Deep, rich gloss * Warm golden colour * Excellent UV protection * For interior and exterior use. Schooner has excellent water resistance, silky application and superior selfleveling properties. PRODUCT INFORMATION Colour High Gloss Specific Gravity Volume Solids Typical Shelf Life Unit Size DRYING/OVERCOATING INFORMATION Drying 10°C (50°F) PREVIOUSLY VARNISHED WOOD In Good Condition Clean with Yacht Line Super Cleaner. Sand smooth with 280320 grade paper. Remove sanding dust with a dust wipe. In Poor Condition Remove all previous coatings. BARE WOOD Sand smooth with 80180 grade paper and then 280 grade paper. Clean surface by brushing, dusting or wiping. If wiping with solvent then allow to dry completely before applying first coat of varnish. Pour the amount you expect to use in a separate container. Avoid using direct from the can. Strain it through a paint strainer to ensure there is no contamination. PREVIOUSLY VARNISHED WOOD: Apply 24 full coats, until a satisfactory finish is achieved. Sand between coats using 320400 grade paper. Remove dust with a dust wipe. BARE WOOD: Apply the first coat thinned 10% with Thinner No. 1. Apply a further 46 full coats until a satisfactory finish is achieved. Sand between coats using 320400 grade paper. Remove dust with a dust wipe. Do not apply too thickly. Mixing Stir well before use. Thinner Brush YTA800 Thinner No. 1. Spray Thinner No. 1 or Thinner 910. Ventilation and Humidity Control Apply in dry, well ventilated conditions. Avoid damp conditions. Cold weather retards the drying and humidity can spoil the gloss. Airless Spray (Professional spray application only) Pressure: 170 bar/2500 psi. Tip Size: 0.330.41 mm/1316 thou. Air Atomized (Professional spray application only) Pressure Pot: Pressure: 3.444.47 bar/5065 psi (gun pressure); 810 psi (pot pressure). Tip Size: 0.891.4 mm/3550 thou. Siphon Cup: Pressure: 3.444.47 bar/5065 psi gun pressure. Tip Size: 0.891.4 mm/3550 thou. Brush Always use a clean brush that is kept specifically for varnishing. Clean brushes before use. Roller If rolling, use a thin nap roller and "tipoff" with a clean natural bristle brush. Other Spray pressures listed are recommendations only. The applicator may use any settings which yield the best results for the individual spraying technique and current weather conditions. To enhance appearance of the bare wood and fill porous open grain, apply Interstain according to label directions and allow to dry overnight. To prevent skinning in the tin add a teaspoonful (5ml) of Thinner No. 1 on the surface before closing the lid. Some Important Points Never leave bare wood exposed for long periods of time as it will absorb moisture. Avoid using Schooner straight from Please refer to your local representative or visit www.yachtpaint.com for further information. the can as this will cause it to age prematurely and may introduce contamination to the can. Failure to follow proper dry All trademarks mentioned in this publication are owned by, or licensed to, the AkzoNobel group of companies. © AkzoNobel 2019. times carefully will cause improper drying, wrinkling and loss of adhesion. Avoid painting in direct sunlight. Use

Schooner Varnishes Premium High Gloss Airless Spray (Professional spray application only) Pressure: 170 bar/2500 psi. Tip Size: 0.330.41 mm/1316 thou. Air Atomized (Professional spray application only) Pressure Pot: Pressure: 3.444.47 bar/5065 psi (gun pressure); 810 psi (pot pressure). Tip Size: 0.891.4 mm/3550 thou. Siphon Cup: Pressure: 3.444.47 bar/5065 psi gun pressure. Tip Size: 0.891.4 mm/3550 thou. Brush Always use a clean brush that is kept specifically for varnishing. Clean brushes before use. Roller If rolling, use a thin nap roller and "tipoff" with a clean natural bristle brush....