Catalogs >
International Marine >
Intersmooth 365 SPC

Intersmooth 365 SPC
4Pages

Catalog excerpts

Intersmooth 365 SPC TBT Free Self Polishing Copolymer A/F PRODUCT DESCRIPTION High performance, TBT free, self polishing copolymer (SPC) antifouling system with patented Copper Acrylate technology. INTENDED USES Suitable for use on both Coastal and Deep sea vessels depending on activity profile and intended service life For use at Newbuilding. PRODUCT INFORMATION Colour BEA363-Dark Brown, BEA364-Dark Red, BEA365-Mid Brown, BEA373-Dark Brown, BEA374-Dark Red (Note: BEA373-Dark Brown, BEA374-Dark Red only available in China and specific locations in Europe only - see Worldwide Availability section) Finish/Sheen Not applicable Part B (Curing Agent) Not applicable Volume Solids 40% ±2% (ISO 3233:1998) Typical Film Thickness Range: 70 - 140 microns dry (175 - 350 microns wet) may be specified depending upon end use. Theoretical Coverage Range: 5.7 - 2.9 m²/litre at 70 - 140 microns dft, allow appropriate loss factors Method of Application Airless Spray, Brush, Roller Flash Point Single Pack 22°C (Product produced and supplied in North America has a flashpoint of 21°C due to locally sourced solvents. There is no detrimental effect on product performance.) Drying Information -5°C 25°C 35°C 120 mins 60 mins 40 mins 30 mins 30 hrs 18 hrs 12 hrs 10 hrs -5°C Touch Dry [ISO 9117/3:2010] 5°C 5°C Before Flooding Overcoating Data - see limitations Overcoated By Intersmooth 365 SPC Note REGULATORY DATA Substrate Temperature 25°C 35°C Min Max Min Max Min Max Min Max 12 hrs 6 mths 6 hrs 6 mths 4 hrs 6 mths 3 hrs 6 mths Refer to your International Paint representative for minimum drying time before flooding at higher dry film thickness per coat. VOC 518 g/lt as supplied (EPA Method 24) 343 g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council Directive 1999/13/EC) Note: VOC values are typical and are provided for guidance purposes only. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. EPA USA Federal EPA Registration No. 2693-188 (BEA363, BEA364) BEA365 is not approved in the USA This product is not registered in Canada. See Page 4 for additional Regulatory Data. This product does not contain organotin compounds acting as biocides and as such is in compliance with the International Convention on the Control of Harmful Anti-fouling Systems on ships as adopted by IMO in October 2001 (IMO document AFS/CONF/26). Marine Coatings Page 1 of 4 Issue Date:23/08/2011 Ref:78

Open the catalog to page 1

Intersmooth 365 SPC TBT Free Self Polishing Copolymer A/F CERTIFICATION When used as part of an approved scheme, this material has the following certification: Product recognised by the following classification societies as compliant with the International Convention on the Control of Harmful Anti-fouling Systems on Ships, 2001 (AFS 2001): • • • • • Lloyds Register Germanischer Lloyd Korean Register of Shipping Det Norske Veritas Bureau Veritas Consult your International Paint representative for details. SYSTEMS AND COMPATIBILITY Consult your International Paint representative for the...

Open the catalog to page 2

TBT Free Self Polishing Copolymer A/F Airless Spray This material is a one pack coating. Always mix thoroughly with a power agitator before application. Not Recommended. Use International GTA007 only in exceptional circumstances (max 5% by volume). DO NOT thin more than allowed by local environmental legislation. Total output fluid pressure at spray tip not less than 211 kg/cm2 (3000 p.s.i.) Application by brush is recommended for small areas only. Multiple coats may be required to achieve specified film thickness. Application by roller is recommended for small areas only. Multiple coats...

Open the catalog to page 3

Intersmooth 365 SPC TBT Free Self Polishing Copolymer A/F LIMITATIONS Coating lifetime is directly proportional to thickness applied. Performance of the product is dependent upon the specified film thickness being achieved. On immersion, Intersmooth 365 SPC will exhibit a slight colour change. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. Consult your local International Paint representative for specific recommendations. Apply in good weather. Temperature of the surface to be coated must be...

Open the catalog to page 4