Catalogs >
International Marine >
Intersleek7180Brochure

Intersleek7180Brochure
2Pages

Catalog excerpts

5719 Intersleek 7180 PIC 2 v2.qxd:1 18/08/2010 16:46 Page 1 PANTONE Red 032 C: For positional purposes only – Do NOT Print PERFORATED SECTION <297mm> <210mm> Intersleek 7180 ® Linkcoat for Intersleek® foul release systems Intersleek®7180 Linkcoat application over a wide range of substrates Product Description A two pack Linkcoat for foul release systems. Allows the application of Intersleek®700 and Intersleek®900 foul release systems over a wide range of existing biocidal antifouling technologies, including Self Polishing Copolymers, Self Polishing Antifoulings, Duplex Schemes and Controlled Depletion Polymers. Suitable for use at Newbuilding or Maintenance and Repair. Features Control of conversion to Intersleek® systems Improved vessel efficiency through excellent fouling control and smooth hull Removes requirement for full blasting Call: +44 (0)191 469 6111 Fax: +44 (0)191 495 2003 Send an email: marine.communication@akzonobel.com Visit our website: www.international-marine.com/intersleek7180 Creates a smooth surface lowering the hull roughness and improving vessel efficiency Acts as a barrier to prevent biocides leaching from existing antifoulings International Paint Ltd is part of AkzoNobel, the Netherlands based company serving customers throughout the world with coatings and chemicals. Self Polishing Copolymer Reduction in surface preparation & expense of full blast Reduced time in drydock Less waste disposal Smoother hull Reducing hull roughness for vessel efficiency. International Paint Ltd, Stoneygate Lane, Felling Gateshead, NE10 0JY United Kingdom Benefits Compatible with a wide range of biocidal antifouling systems Intersleek 7180 Freedom from future biocide restrictions Sign up to keep up to date with our latest news visit www.international-marine.com/signup This brochure is: Self Polishing Antifouling All representations and statements concerning the product(s) in this publication are accurate to the best of our knowledge. Statements made in this publication are advisory only and are not intended to be specific recommendations or warranties of any product, combination of products or fitness for any particular purpose. To the extent permitted by law, we do not accept any liability to any person for any loss or damage (direct or indirect) that may arise from any use or reliance on any of the methods or information contained in this publication for any purpose. Product Information Colour BXA752 Red Brown Surface preparation HPFWW to remove leached layer Volume solids 56% ±2% (ISO3233:1998) Typical film thickness 100 microns Hard dry 9 hours @ 25ºC Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company. Any warranties, if given, are contained in those standard Conditions of Sale and are the only ones made with respect to any products we sell to your or advice or recommendations we give to you. We hereby disclaim any warranties or representations, expressed or implied, by operation of law or otherwise, including, without limitation, any implied warranty of merchantability or fitness for a particular purpose. Minimum application temperature 10ºC Method of application Airless Spray, Brush, Roller For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website. Important Notes: Controlled Depletion Polymer For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website: www.international-marine.com and International® and all products mentioned in this publication are trademarks of, or are licensed to, AkzoNobel. © AkzoNobel, 2010 When you have finished with this brochure, pass it on to a colleague or recycle DD10101701/Aug10 10101701 Smart Link Coat 6pp aw2.indd 4-6 24/08/2010 16:46

Open the catalog to page 1

5719 Intersleek 7180 PIC 2 v2.qxd:1 18/08/2010 16:46 Page 2 PANTONE Red 032 C: For positional purposes only – Do NOT Print <297mm> <210mm> Intersleek 7180 ® A smoother hull helps reduce fuel costs and greenhouse gas emissions Intersleek® Linkcoat application Dual Cure Technology Intersleek®7180 uses a specialised dual-cure technology (DCT) - a combination of: • Epoxy-amine cure to give excellent drying and barrier properties • Secondary cure using flexible polymer chemistry which enhances adhesion to a range of different antifouling surfaces The special properties created by DCT start...

Open the catalog to page 2