Interline 104 Inorganic Zinc Tank Coating PRODUCT DESCRIPTION A two pack, FDA compliant zinc ethyl silicate tank coating. INTENDED USES A tank coating suitable for the carriage of petroleum products, solvents (including methanol) and other neutral cargoes. For use at Newbuilding or Maintenance & Repair. PRODUCT INFORMATION Colour QHA126-Grey Finish/Sheen Not applicable Part B (Curing Agent) QHA125 Volume Solids 52% ±2% (ISO 3233:1998) Mix Ratio 2.83 volume(s) Part A to 1 volume(s) Part B Typical Film Thickness 100 microns dry (192 microns wet) Theoretical Coverage 5.20 m²/litre at 100 microns dft, allow appropriate loss factors Method of Application Airless Spray, Brush, Conventional Spray, Roller Flash Point Part A 32°C; Part B 15°C; Mixed 21°C Induction Period Not required Drying Information 5°C 10°C 25°C 35°C Touch Dry [ISO 1517:73] 60 mins 60 mins 60 mins 30 mins Hard Dry [ISO 9117:90] 4 hrs 3 hrs 2 hrs 2 hrs Pot Life 8 hrs 7 hrs 4 hrs 2 hrs 5°C 10°C Overcoating Data - see limitations Overcoated By Interline 104 REGULATORY DATA VOC Substrate Temperature 25°C 35°C Min Max Min Max Min Max Min Max 24 hrs 10 days 24 hrs 10 days 24 hrs 10 days 24 hrs 8 days 618 g/lt as supplied (EPA Method 24) 258 g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council Directive 1999/13/EC) Note: VOC values are typical and are provided for guidance purposes only. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. Marine Coatings Page 1 of 4 Issue Date:07/07/2009 Ref:538

Interline 104 Inorganic Zinc Tank Coating CERTIFICATION When used as part of an approved scheme, this material has the following certification: • Food Contact - FDA Compliant: Liquid and Dry Foodstuffs Consult your International Paint representative for details. SYSTEMS AND COMPATIBILITY Consult your International Paint representative for the system best suited for the surfaces to be protected. When using in cargo tanks, consult the Interline 104 Cargo Tank Application Procedures. SURFACE PREPARATIONS Use in accordance with the standard Worldwide Marine Specifications. All surfaces to be coated...

Interline 104 Inorganic Zinc Tank Coating APPLICATION Mixing Interline 104 is supplied in 2 parts, a paste component (Part A) and a liquid binder component (Part B). The binder (Part B) should be slowly added to the paste (Part A) whilst stirring with a mechanical agitator. DO NOT ADD PASTE TO LIQUID. Material should be sieved prior to application and should be constantly agitated in the pot during spraying. Once the unit has been mixed it should be used within the working pot life. This is a low viscosity material and agitation is required during application to ensure homogeneity is maintained....

Interline 104 Inorganic Zinc Tank Coating LIMITATIONS UNIT SIZE International Paint should be consulted to confirm that the tank coating is suitable for the range of cargoes to be carried. The drying times and overcoating intervals may alter due to various on-site factors such as humidity, tank configuration, ventilation rates, etc. Consult the detailed coating application procedures for the time interval required between coating completion and cargo loading. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental...