Catalogs >
International Marine >
Intergard 7020

Intergard 7020
2Pages

Catalog excerpts

Intergard 7020 ® Abrasion resistant aluminium pure epoxy Application Properties Product Description Intergard®7020 is a two-component pure epoxy coating, containing aluminium. It offers long term anticorrosive protection and good abrasion resistance. Applicable all year round, the product has both FDA and Grain Carriage certification making it an all round multipurpose hold coating. Suitable for use as a cargo hold coating at Maintenance and Repair. Features Benefits Abrasion resistance and corrosion protection Provides long term asset protection and control of future maintenance costs Certified for carriage of grain and FDA compliant for dry foodstuffs Allows cargo flexibility to optimise vessel efficiency Smooth glossy surface Easier cleaning between cargoes reducing down time and costs VOC compliant (239g/lt: EPA Method 24 and 177g/kg SED) Control of solvent emissions giving compliance with current legislation Applicable at -5°C to 35°C The same product can be applied all year round giving simplicity and flexibility. Can be applied to surfaces prepared to Sa2 (ISO 8501-1:2007) Abrasion resistance with control of surface preparation costs compared to Sa2.5 (ISO8501-1:2007) Minimal secondary surface preparation Easier repair / touch up for crews High solids, high build and easy to apply. Smooth and glossy finish for easy clean Product Information Colour EHA702 Aluminium Red, EHA703 Aluminium Grey Surface preparation Sa2 (ISO 8501-1:2007) Volume solids 74% ±2% (ISO 3233:1998) Typical film thickness 2 x 125 microns dry Hard dry 12 hours at 25°C VOC 239g/lt as supplied: EPA Method 24 177g/kg as supplied: EU Solvent Emissions Directive (Council Directive 1999/13/EC) Minimum application temperature -5°C Method of application Airless spray, brush and roller For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website. Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company and the provisions of the relevant product data sheet. Red finish coat

Open the catalog to page 1

Intergard 7020 ® Abrasion Test Results Following Internal Cargo Drag Test at 25°C and 4 Days Cure Abrasion Resistance Intergard®7020 has been formulated to provide good abrasion resistance to the harsh environment found in cargo holds. Utilising a combination of in-house testing and in-service experience, Intergard®7020 delivers performance to meet the needs of ship owners looking to upgrade from modified epoxy cargo hold coatings. Cargo Settlement Damage Typical settlement damage Steel substrate Typical modified epoxy Intergard®7020 MODIFIED EPOXY Freshly loaded cargo Cargo ‘settles’ in...

Open the catalog to page 2