Catalogs >
International Marine >
Intergard 5600 / 5620

Intergard 5600 / 5620
2Pages

Catalog excerpts

Intergard 5600/5620 ® Light coloured, epoxy universal primer Product Description In Service Performance Intergard®5600 and Intergard®5620 are light coloured, epoxy universal primers for use in ballast tanks, outer hulls, cofferdams, void spaces, decks, cargo holds and crude oil tanks. Suitable for use with controlled cathodic protection. For use at Newbuilding. Intergard®5620 is a fast cure, low temperature product. Features Benefits Universal application Simplified block coating procedures Light coloured Aids inspection and working conditions Optimised application properties Excellent sprayability year round Intergard®5620 cures at low temperature Year round workability and fast access Aluminium reinforcement Enhanced corrosion protection IMO PSPC Compliant (Water Ballast Tanks) Meets latest regulatory requirements Excellent performance in water ballast tanks of a 3,100 TEU container vessel after 5 years in service Good condition on welds and sharp edges after 5 years in service Product Information Colour Intergard®5600 Intergard®5620 KUA602 Grey, KUA606 Red KUA622 Grey, KUA626 Red Surface preparation Surface should be clean, dry and free from contamination Volume solids 68% ±2% (ISO 3233:1998) Typical film thickness 2 x 160 microns dry (IMO PSPC Ballast tanks) Hard dry Intergard®5600 12 hours at 25°C / Intergard®5620 14 hours at 5°C Minimum application temperature Intergard®5600 5°C / Intergard®5620 -5ºC Method of application Airless Spray, Brush and Roller For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website. Very good performance in water ballast tanks of a chemical tanker after 9 years in service

Open the catalog to page 1

Intergard 5600/5620 ® Universal Application Application EXTERNAL DECKS Typical Vessel Areas The universal primer allows the replacement of several products with a single product that meets all the required characteristics that the shipyard demands as well as the in service performance expectations of the vessel operator. TOPSIDES CARGO HOLDS/ CRUDE OIL TANKS VOIDS UNDERWATER HULL WATER BALLAST TANKS Typical vessel areas coated using a universal primer Completed application to the outside shell and ballast tank areas Application Track Record Intergard®5600 and Intergard®5620 were evolved...

Open the catalog to page 2