Catalogs >
International Marine >
Interflex 8700 SPC

Interflex 8700 SPC
4Pages

Catalog excerpts

Interflex 8700 SPC Copper Free, Low Friction, Self Polishing Copolymer A/F PRODUCT DESCRIPTION A high solids, high performance, TBT free, copper free, low friction, self polishing Copolymer (SPC) antifouling with patented copper acrylate technology. Particularly suitable for fouling protection under static conditions and in service trading. INTENDED USES Developed especially to meet the severe fouling challenges of vessels during Newbuilding fitting out and also in service trading. Designed for use at newbuilding fitting out and in service trading under severe fouling conditions. Suitable as part of an overall scheme with all Intersmooth and Intercept deep sea products, depending on activity profile and intended service life. For use at Newbuilding and Maintenance & Repair. PRODUCT INFORMATION BEA974-Brown, BEA977-Red and a limited range of colours Part B (Curing Agent) Volume Solids Typical Film Thickness Range: 75 - 190 microns dry (132 - 334 microns wet) may be specified depending on end use. Theoretical Coverage Range: 7.6 - 3.0 m²/litre at 75 - 190 microns dft, allow appropriate loss factors Airless Spray, Brush, Roller Flash Point (Typical) Drying Information Before Flooding Overcoating Data - see limitations REGULATORY DATA Substrate Temperature Note: VOC values are typical and are provided for guidance purposes only. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. This product does not contain organotin compounds acting as biocides and as such is in compliance with the International Convention on the Control of Harmful Anti-fouling Systems on ships as adopted by IMO in October 2001 (IMO document AFS/CONF/26). Marine Coatings Page 1 of 4 Issue Date:09/03/2018 R

Open the catalog to page 1

Interflex 8700 SPC Copper Free, Low Friction, Self Polishing Copolymer A/F CERTIFICATION When used as part of an approved scheme, this product has the following certification: Product recognised by the following classification societies as compliant with the International Convention on the Control of Harmful Anti-fouling Systems on Ships, 2001 (AFS 2001): • • • • Bureau Veritas DNV GL Korean Register of Shipping Lloyds Register Consult your International Paint representative for details. SYSTEMS AND COMPATIBILITY Consult your International Paint representative for the system best suited for...

Open the catalog to page 2

Interflex 8700 SPC Copper Free, Low Friction, Self Polishing Copolymer A/F APPLICATION Mixing This material is a one pack coating and should always be mixed thoroughly with a power agitator before application. Not Recommended. Use International GTA007 only in exceptional circumstances (max 5% by volume). DO NOT thin more than allowed by local environmental legislation. Airless Spray Recommended Tip Range 0.63-0.79 mm (25-31 thou) Total output fluid pressure at spray tip not less than 211 kg/cm² (3000 p.s.i.) Conventional Spray Application by conventional spray is not recommended....

Open the catalog to page 3

Interflex 8700 SPC Copper Free, Low Friction, Self Polishing Copolymer A/F LIMITATIONS UNIT SIZE Following immersion, this product will brighten in colour. Apply in good weather. Temperature of the surface to be coated must be at least 3°C above the dew point. For optimum application properties bring the material to 21-27°C, unless specifically instructed otherwise, prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet. Technical and application data...

Open the catalog to page 4