Kestrel 3000 measures
2Pages

{{requestButtons}}

Catalog excerpts

Kestrel 3000 measures - 1

Know your conditions Measure environmental conditions quickly and accurately Wide range of wind speeds and a low start-up speed Reliable, portable and easy to use Small, robust design Data hold function Large easy to read display with backlight Waterproof and floats High precision Zytel® mounted impeller Replaceable impeller assembly Fast response temperature sensor Long life lithium battery Includes protective cover, lanyard and battery 5 year warranty Choice of measurement units: Knots, Metres per second, Kilometres per hour, Miles per hour, Feet per minute and Beaufort Force. Centigrade and Fahrenheit Measurement Current, Max and Average Wind speed Temperature, Wind Chill Heat index, Dew Point Relative Humidity % Units of Measure kt, m/s, km/h, mph, ft/min, Beaufort (B) °C, °F DESCRIPTION The Kestrel 3000 Environmental meter provides high quality, performance and functionality. It has three buttons below the display, making operation simple and allowing the user to view data in current, maximum and average wind speed, temperature, wind chill, relative humidity, heat index and dew point displays and also the data hold function. The Kestrel 3000 is a small, electronic rotating vane type of anemometer with built-in temperature and humidity sensors. It uses high precision Zytel® bearings and a light weight impeller to provide accurate air flow measurements even at low speeds. The impeller assembly is replaceable bythe user in the case of damage. In order to quickly determine a steady temperature reading, the precision thermistor temperature sensor is mounted externally. Wind chill and heat index are equivalent temperatures that show the user how their environment really feels. Wind chill is the combination of wind speed and temperature, while heat index is the combined effect of air temperature and relative humidity. The liquid crystal display has large 9mm high digits and is backlit for a clear readout in low light conditions. Power is from an easily replaceable standard lithium coin cell battery, which will typically give up to 300 hours of operation. The instrument automatically switches off if no keys are pressed for 45 minutes. The Kestrel 3000 is made from high impact injection moulded plastic and corrosion resistant materials with the electronics fully sealed. It will float if accidentally dropped into water. There is a hard cover for protection when not in use and a lanyard is provided for added security.

Open the catalog to page 1
Kestrel 3000 measures - 2

The manufacturer reserves the right to amend the specification and therefore the information in this document may be subject to change.

Open the catalog to page 2

All Instromet Weather Systems Ltd catalogs and brochures

  1. instromet

    16 Pages

  2. Humidity

    2 Pages