Know your conditions Measure environmental conditions quickly and accurately Wide range of wind speeds and a low start-up speed Reliable, portable and easy to use Small, robust design Data hold function Large easy to read display with backlight Waterproof and floats High precision Zytel® mounted impeller Replaceable impeller assembly Fast response temperature sensor Long life lithium battery Includes protective cover, lanyard and battery 5 year warranty Choice of measurement units: Knots, Metres per second, Kilometres per hour, Miles per hour, Feet per minute and Beaufort Force. Centigrade and Fahrenheit Measurement Current, Max and Average Wind speed Temperature, Wind Chill Units of Measure knots, m/s, km/h, mph ft/min, Beaufort (B) °C, °F DESCRIPTION The Kestrel 2000 thermo anemometer provides high quality, performance and functionality. It has three buttons below the display, making operation simple and allowing the user to view data in current, maximum and average wind speed displays, temperature and wind chill displays and also the data hold function. The Kestrel 2000 is a small, electronic rotating vane type anemometer with a built-in temperature sensor. It uses high precision Zytel® bearings and a lightweight impeller to provide accurate air flow measurements even at low speeds. The impeller assembly is replaceable by the user in the case of damage. In order to quickly determine a steady temperature reading, the precision thermistor temperature sensor is mounted externally. The liquid crystal display has large 9mm high digits and is backlit for a clear readout in low light conditions. Power is from an easily replaceable standard lithium coin cell battery, which will typically give up to 300 hours of operation. The instrument automatically switches off if no keys are pressed for 45 minutes. The Kestrel 2000 is made from high impact injection moulded plastic and corrosion resistant materials with the electronics fully sealed. It will float if accidentally dropped into water. There is a hard cover for protection when not in use and a lanyard for added security. APPLICATIONS Agriculture checking conditions prior to crop spraying or burning Aviation gliders, para-gliders, micro-lights, parachutists and ballooning Construction site safety, working conditions, working at height in cranes or access vehicles Education air flow experiments, environmental studies, outdoor sports Heating and ventilation air flow through fans, checking condition of filters Industry air flow measurements, pollution control Science aerodynamics, environmental science and meteorology Fire fighters checking fire spreading hazard ALL - sailors, walkers, model boats/air craft, kite flyers, archery, shooting, fishing, golf & athletics

The manufacturer reserves the right to amend the specification and therefore the information in this document may be subject to change.