Interiors by INEXA Craftsmen to the world´s finest ships TNF Ceilings C80

TNF Ceilings C80 - components Design freedom The C80 ceiling system gives maximum freedom with reference to form, colour combination and integrated / concealed lighting fittings. The ceiling is based upon the popular spline/panel design – but in a new form in which panels are of differing widths, panel direction can easily be changed, and not least, there is a choice of colours for both panel and spline. In addition, lighting and ventilation appliances can be incorporated in the spline panel, so that they are a discrete aspect of the overall design. This makes it possible to create all forms...

TNF Ceilings C80 - components Light fittings It is possible to incorporate lighting on both panel types. In the broader female panel, standard fittings are used which, after installation, are insulated on the upper side. Alternatively, concealed fluorescent lighting units can be mounted on the spline panel – in this case the minimum width will be 40mm. Fluorescent tubes can be either visible or concealed by a matt plastic covering. In all cases, illumination requirements are calculated. Similarly, ventilation accessories can be installed on both panel types, and as with lighting fittings, the...

TNF Ceilings C80 - colours Design – colour. It is possible to work with all colours and colour combinations, using the spline panels as passive or active components in each design. The ceiling can also be delivered with gloss surfaces, for example, silver, gold or stainless steel.

TNF Ceilings C80 – planning and layout Physical design The ceiling is finished with spline perimeter panels adjacent to all walls, just as spline panels are used to achieve panel direction transition changes. By this means the ceiling retains its freedom of expression. Changes in panel directions require a special layout of the abutting panels, but the spline panels are the same width in all directions, and dismantling tasks are likewise optimal. However, to ensure ceiling stability, the first spline panel after a direction change must be strapped in position.

TNF Ceilings C80 – details Wall mounting All panels are self-supporting up to 3 m, and they are laid off from either the wall’s hat-/ or angle profile. To ensure fire safety, and to minimise vibration, all panels are secured at each end by pop rivets.

TNF Ceilings C80 – ceiling quality features MAGIC Surface Fire protection Fire class: A30 300 mm The surface finish has a built-in extra advantage with the special MAGIC coating which contains no halogens, no toxic fumes and gives a minimum flame spread. B15 The ceilings are also available with a surface of stainless steel . For extra protection during handling and installation the ceiling panels carry a peel-off film. IMO Standard The TNF ceiling complies with SOLAS safety regulations and is approved by all major authorities and classification societies. · Each ceiling panel is fully insulated....

TNF is the complete high quality accommodation system for all marine interiors. The TNF system includes wall and ceiling panels, doors, floors and wetunits. TNF has been leading the development in marine interiors since 1973. The world famous TNF quality is demonstrated in the environment, which can be designed to provide the ideal conditions for all functions. TNF www.inexa.com [email protected]