POLYURETHANE VARNISH FOR FURNITURE AND WOODEN FLOORS M18

Product catalog summary

Product Overview: The document describes a two-component polyurethane varnish, identified by Product Code M18, suitable for both indoor and outdoor use. It is characterized by its high gloss, durability, elasticity, and resistance to weathering, wear, and chemicals. The varnish is non-yellowing and ideal for surfaces requiring excellent appearance and protection, such as wooden floors, bar counters, and furniture.

Technical Specifications: The varnish is composed of acrylic polyol and aliphatic isocyanate, with a gloss finish and clear color. It has a density of 0.95 - 1.00 Kg/l and covers 11 - 15 m2/l. The drying time at 23ºC and 60% RH is 5 - 7 hours, with a recoat time of 18 - 24 hours. The mixing ratio is 4 parts base to 1 part hardener, and the pot life at 23ºC is 4 - 8 hours. Application methods include brush, roller, and spray-gun, with cleaning done using TITAN Yate Thinner. The varnish should be applied at temperatures between +10ºC and +30ºC, with a maximum VOC of 500 g/l.

Application Instructions: Surfaces must be smooth, clean, and dry before application. The varnish should be applied in thin coats, with light sanding between coats. For bare surfaces, sanding should follow the wood grain, and any resin should be removed. Indoor wood requires two coats, while outdoor wood benefits from an additional undercoat for enhanced protection. Maintenance of previously coated surfaces involves sanding and applying 1 or 2 coats, depending on the condition.

Precautions and Storage: Users should read the label and safety data sheet before use. The varnish should be stored in tightly closed containers away from heat sources and temperatures below 0ºC, with a shelf life of 36 months. Waste management should comply with local regulations, and leftover material should be stored for future use.

Additional Information: The document includes a reaction to fire certification and emphasizes the importance of consulting technical services in case of doubt. The issue date of the document is October 2020, and it is subject to cancellation by a subsequent sheet or five years after the issue date.

Catalog excerpts

POLYURETHANE VARNISH FOR FURNITURE AND WOODEN FLOORS M18-1

POLYURETHANE VARNISH FOR FURNITURE AND WOODEN FLOORS Indoor - Outdoor. Gloss Description Two-component varnish. Very hard and elastic. Excellent gloss retention and resistance to weathering, wearing, washes and chemicals (grease, petrol, gas-oil, etc. ). Non yellowing. Fields of Application Indoors and outdoors. Ideal for protection of surfaces made of noble and exotic wood (pine, teck...), cork, in high wearing conditions or where an excellent appearance must be kept (bar counters, wood floors, worktops, balconies, chairs, doors, ...) It can also be used on glass-fibre, stone and porous tiles. Technical Data Product Type Acrylic polyol and aliphatic isocyanate Mixing Rate Base: 4 parts. Hardener: 1 part Brush, roller and spray-gun Equipment Cleaning TITAN Yate Thinner Pack sizes Variations in temperature, humidity, thickness, tinting or surface type, etc. may lead to changes in drying, in coverage or in other properties. Certificates Reaction to Fire UNE EN 13501-1: C-s1, d0 / On MDF substrate B-s1, d0

Open the catalog to page 1

POLYURETHANE VARNISH FOR FURNITURE AND WOODEN FLOORS M18-2

Directions for use GENERAL REMARKS: Thoroughly stir the contents in the pack. The surfaces have to be smooth (sanded), degreased, clean and dry. Apply by thin coats. Lightly sand between every two coats. The wood moisture content must not exceed 12% in hard wood and 15% in soft wood. Wait 24 hours before stepping on the surface. BARE SURFACES: Sand the wood following the wood grain. Clean the surface, remove resin or resin secretion and smooth up sharp edges. Old bare Wood: It is essential to entirely remove the dried out, greyed surface by sanding or surfacing thoroughly until the wood in good...

Open the catalog to page 2