M47
2Pages

Catalog excerpts

WATER BASED ANTI TANNIN TREATMENT Indoor - Outdoor Description Blocking varnish that prevents the exudation of tannins to the surface. Avoids staining and deterioration of the subsequent coats, both of varnish and enamel. Quick drying. Fields of Application Suitable preparation before painting on wood. Technical Data Product Type Acrylic modified 40 - 60 minutes / touch dry: 15 - 30 minutes Equipment Cleaning Pack sizes Variations in temperature, humidity, thickness, tinting or surface type, etc. may lead to changes in drying, in coverage or in other properties. Directions for use GENERAL REMARKS: Thoroughly stir the contents in the pack. The surfaces have to be smooth (sanded), degreased, clean and dry. The wood moisture content must not exceed 12% in hard wood and 15% in soft wood. Do not varnish under strong sunlight or with dew drops. BARE SURFACES: Sand the wood following the wood grain. Clean the surface, remove resin or resin secretion and smooth up sharp edges. Old bare Wood: It is essential to entirely remove the dried out, greyed surface by sanding or surfacing thoroughly until the wood in good condition is exposed. Outdoor wood: For improving the wood protection, apply one coat of Titanxyl Total Protection Ultra or Titanxyl Lasur Undercoat

Open the catalog to page 1

Ultra. Finish with 2 coats of Anti Tannin Water Based Undercoat. For restoring indoor wood with woodworm problems, apply one coat of Titanxyl Woodworm Treatment Plus, in case of mould apply a base coat of Titanxyl Total Protection Ultra or Titanxyl Lasur Undercoat Ultra. Resinous and tropical wood: Drying can be difficult. Thoroughly degrease the wooden surface with TITAN Yate Thinner to remove resin.. Apply one varnish coat on a small area. Check if there is resin exudation. If this is the case, please refer to the Technical Service. If there is no resin exudation, finish with one coat of...

Open the catalog to page 2