ENAMEL FOR FISHING BOATS

Product catalog summary

Product Overview: The enamel is a high-gloss coating based on long-oil alkyd resins, designed for marine environments and fishing boat maintenance. It offers non-slip properties without using sand or marble-like stone, ensuring easy application and uniform finishes.

Fields of Application: Suitable for indoor and outdoor use on primed iron, polyester, and wooden surfaces. Ideal for boat decks, stairs, and ramps, it is resistant to rubbing, grease, oil, and marine atmospheres, achieving full abrasion resistance after 7 days.

Technical Specifications: The enamel is a high solid alkyd with a gloss finish, available in white and a range of colors. It has a density of 0.96 - 1.20 Kg/l and covers 12 - 16 m2/l. Drying time is 4 - 5 hours, with a recoat time of 24 hours. Application methods include brush, roller, and spray-gun, with specific thinning requirements. Recommended application temperature is between +10ºC and +30ºC.

Application Instructions: Surfaces must be sanded, clean, dry, and salt-free. For bare surfaces, specific primers are recommended before applying the enamel. For maintenance, surfaces in good condition should be washed and sanded before application, while those in poor condition require complete removal of previous coats.

Precautions and Storage: Users should read the label and safety data sheet before use. The product should be stored in tightly closed containers, away from heat sources and temperatures below 0ºC, with a shelf life of 36 months. Waste should be managed according to local regulations.

Additional Information: The technical sheet is valid for five years from the issue date. The manufacturer guarantees product quality but disclaims liability for improper use or application methods.

Catalog excerpts

ENAMEL FOR FISHING BOATS Indoor - Outdoor. Gloss Description Enamel based on highly resistant long-oil alkyd resins. Especially intended for the protection of structures in marine environments and for the maintenance of fishing boats. Non-slip shades for boat decks contains neither sand nor marble-like stone. The low density additive makes possible a homogeneous paint structure and provides easy application, and uniform finishes Fields of Application Indoor and outdoor enamel for the maintenance of suitably primed iron, polyester and wooden surfaces. Non-slipping shades are especially suitable for boat decks, stairs, ramps, etc. Resistant to rubbing, grease, oil and marine atmospheres. (Complete cross-linking and abrasion resistance are reached after 7 days). Technical Data Product Type High solid alkyd White and colour range Brush, roller and spray-gun Application Viscosity Brosse et rouleau: 0 - 5%, Pistolet: 5 - 15% Brush and roller: 0 - 5%, Spray-gun: 5 - 15% Equipment Cleaning TITAN Thinner and Grease Thinner or Turpentine 80 - 120 μ dry film ( 2 - 3 coats applied) Pack sizes Variations in temperature, humidity, thickness, tinting or surface type, etc. may lead to changes in drying, in coverage or in other properties. Directions for use GENERAL REMARKS

Open the catalog to page 1

Carefully stir the contents in the can before use. The surface has to be sanded, clean, dry and salt-free (wash it). Do not paint if the surface is under direct sunlight or if it has dew on it. BARE SURFACES: Wood: Superstructure: Apply 1 - 2 coats of TITAN Sealing Primer, TITAN Multi-Purpose Primer or TITAN YATE Anticorrosive Epoxy Primer. Finish with Enamel for Fishing Boats. Metal: Superstructure: Apply 1 coat of TITAN YATE Anticorrosive Epoxy Primer, thinned with 20% TITAN YATE Thinner. After 24 hours, apply 2 coats of TITAN YATE M-150 Epoxy Primer. By 72 hours, finish with Enamel for Fishing...

Open the catalog to page 2