ANTICORROSIVE EPOXY PRIMER

Product catalog summary

Product Overview: The Anticorrosive Epoxy Primer is a two-component primer known for its high adhesion, water resistance, and protective properties. It is specifically designed for use with TITAN YATE products and is suitable for various surfaces including polyester, wood, aluminium, iron, and stainless steel.

Technical Specifications:

Product Type: Polyamidoamine epoxy
Finish: Semi-gloss
Colour: Cream
Density: 1.30 - 1.35 Kg/l
Coverage: 8 - 10 m²/l
Drying Time: 2.5 - 3 hours at 23ºC, 60% RH
Recoat Time: 24 hours at 23ºC, 60% RH
Mixing Ratio: Base 4: Hardener 1
Application Methods: Brush, roller, spray-gun
Thinning: 5% for brush and roller, 10-15% for spray-gun
Recommended Thickness: 60 - 70 dry μ (Iron and aluminium min. 120 - 140 μ)
Application Temperature: +10ºC to +30ºC, RH < 80%
Flash Point: 32 ºC
Volume Solids: 47.5 - 48.5%
Pack Sizes: 4 l and 750 ml

Application Instructions:

General: Stir contents before use. Ensure surfaces are clean, dry, and degreased.
Bare Surfaces: For polyester, remove grease and sand lightly. For metal, remove rust and apply primer. For wood, apply two coats, thinning the first coat with 20% thinner.
Maintenance: For surfaces in good condition, rinse and apply directly. For poor condition, remove previous coats and treat as bare surfaces.

Precautions: Read the label before use and refer to the Safety Data Sheet. Store in closed containers away from heat and below 0ºC. Follow local waste management regulations.

Additional Information: The product has a shelf life of 36 months in unopened packaging. The technical sheet is valid for five years from the issue date, which is May 2017.

Catalog excerpts

ANTICORROSIVE EPOXY PRIMER Description Two-component primer. High adhesion, water resistance and protective effect. It is the suitable primer for the TITAN YATE products. Technical Data Product Type Polyamidoamine epoxy Semi gloss Mixing Rate Brush, roller and spray-gun. Brush and Roller: 5%, Spray-gun: 10 - 15% TITAN YATE Thinner Equipment Cleaning TITAN YATE Thinner Pack sizes Variations in temperature, humidity, thickness, tinting or surface type, etc. may lead to changes in drying, in coverage or in other properties. Directions for use GENERAL REMARKS: Carefully stir the contents in the packbefore use. The surfaces to be painted have to be clean, dry and degrease

Open the catalog to page 1

BARE SURFACES: Polyester:Thoroughly remove grease with TITAN YATE Thinner. Lightly sand before applying one coat of TITAN YATE Anticorrosive Epoxy Primer. Only professional painters can apply directly the Epoxy Titan Yate Primer, after taking good care of cleaning and degreasing the surface. A grip test must be performed in order to make sure the surface is correctly prepared and the Epoxy Titan Yate Primer is compatible. Metal: Submerged surfaces: Remove rust. Apply one coat of TITAN YATE Epoxy Primer. After 24 hours 3 - 4 coats of TITAN YATE M150 Thick Coat Epoxy Primer (450 μ). Non-submerged...

Open the catalog to page 2