06T
06T
- Product Type: Vinyl
- Finish: Matt
- Color: White, with Intermediate and Neutral TITANCOLOR Bases
- Density: 1.56 - 1.62 Kg/l
- Coverage: 8 - 10 m²/l
- Drying Time: 30 - 60 minutes at 23ºC, 60% RH
- Recoat Time: 8 hours at 23ºC, 60% RH
- Application Methods: Brush, roller, spray-gun
- Thinner: Water
- Application Temperature: +10ºC to +30ºC, RH < 80%
- Volume Solids: 43.5 - 44.5%
- VOC: Max. < 10 g/l
- Pack Sizes: 15 l and 4 l pails
- Reaction to Fire: B-s1, d0 / on A2-s1, d0 surface
- Wet-scrub Resistance: Class 2
- Hiding Power: Class 2, 8.7 m²/l (98% Hiding Power)
- Mould Resistance: 0 Growth
- VOC Emission: A+
- Stir contents before use. Ensure surfaces are clean, dry, and in good condition.
- Do not apply below 7ºC, with RH ≥ 80%, or if rain is expected.
- For bare surfaces in good condition, apply a thinned first coat followed by an unthinned second coat. For poor condition surfaces, repair and clean before applying a primer.
- For previously coated surfaces, clean and apply a thinned first coat followed by an unthinned second coat.
- Read the label before use and refer to the Safety Data Sheet for more information.
- Store in tightly closed containers, away from heat and below 0ºC. Shelf life is 36 months.
- Dispose of waste according to local regulations and avoid environmental contamination.
- Consult TITAN After-Sales Service for large surface applications requiring scaffolding.
Catalog excerpts
TITANLUX TOTAL COVERAGE – PAIL Indoor - Outdoor. Matt Description Indoor/outdoor wash resistant emulsion paint. High covering with one single coat. For decorating walls and ceilings, where a high quality finish is required. Odourless. Non-dripping. Non-splattering. It contains anti mould preservative. Environmentally friendly. Technical Data Product Type White + TITANCOLOR Bases: Intermediate and Neutral Brush, roller and spray-gun. TITAN Universal Tinting Colours and TITANCOLOR System Pack sizes Variations in temperature, humidity, thickness, tinting or surface type, etc. may lead to changes in drying, in coverage or in other properties. Certificates Reaction to Fire: UNE EN 13501-1: B-s1, d0 / on A2-s1, d0 surface. Wet-scrub resistance UNE EN ISO 11998: Class 2 Determination of contrast ratio (Hiding Power) UNE ISO 6504-3: Class 2. Mould resistance UNE EN 15457: 0 Growth VOC ISO 16000-6 Emission: A+
Open the catalog to page 1
Directions for use GENERAL REMARKS: Carefully stir the contents in the pack. The surfaces to be painted have to be clean, dry and in good condition. ATTENTION . VERY IMPORTANT. DO NOT APPLY: At temperatures below 7 ºC. With relative humidity equal or superior to 80%. If rain is foreseen in the next hours. Failure to follow these instructions may lead to unsatisfactory results in the application, such as patches of different colour or irregular thin lines on areas of the paint film (similar to snail trails, etc.). Industrias TITAN, S.A.U. will not accept any claim if these directions have not...
Open the catalog to page 2All Industrias titan sau catalogs and brochures
02S2 Pages
M472 Pages
0801 Page
00C 42902 Pages
0242 Pages
0112 Pages
0891 Page
0851 Page
08U1 Page
0821 Page
08L1 Page
0522 Pages
S452 Pages
M462 Pages
TITAN ALKYD PASTE FILLER2 Pages
HIDRALUX2 Pages
BLANCDUR2 Pages
ABLATIVE VINYL ANTIFOULING2 Pages
ALUMINIUM PRIMER2 Pages
ANTICORROSIVE EPOXY PRIMER2 Pages
ENAMEL FOR FISHING BOATS2 Pages
- Nautical anti-fouling
- Boat antifouling
- Boat primer
- Self-polishing antifouling coating
- Epoxy primer
- Multi-use primer
- Multi-use antifouling
- Anti-corrosion primer
- Two-component primer
- Epoxy filler
- Boat varnish
- Polyurethane paint
- Wood varnish
- Two-component filler
- High-gloss varnish
- Two-component paint
- Polyester filler
- Acrylic paint
- High-performance antifouling
- Two-component varnish