02S
2Pages

{{requestButtons}}

Catalog excerpts

02S - 1

WATER BASED ENAMEL FOR KITCHEN AND BATHROOM TILES TITANLUX Indoor. Satin Description Satin, multi surface, easy-to-apply, water-based enamel. 2 in 1, no primer is needed and it is suitable for a wide variety of surfaces. To obtain high quality and soft touch finishes. Very hard and resistant to abrasion, scratches, soap and stains of liquor, juice, oil, etc. Very wash resistant. It contains anti mould preservative. Unsuitable for immersion or areas with continuous condensation. Fields of Application Enamel to be directly applied on ceramic tiles. Highly suitable for also painting walls, doors, kitchen and bathroom furniture, radiators, PVC and copper tubes, etc. Do not use either on floor tiles or worktops. Technical Data Product Type Equipment Cleaning Pack sizes Variations in temperature, humidity, thickness, tinting or surface type, etc. may lead to changes in drying, in coverage or in other properties. Directions for use GENERAL REMARKS: Thoroughly stir the contents in the pack. The surfaces to be painted have to be clean, dry and suitably primed. Remove any rest of dirt, grease, poorly adhered rust and old coatings by using household bleach, thinned 9:1, thinner or stripper, depending on needs. BARE SURFACES: Tiles: Deeply clean the surface with diluted household bleach. Rests of grease or silicone may prevent the adhesion of the enamel. For ensuring better adhesion, rub joints with a brush in order to remove any dirt, mould, grease, etc.

Open the catalog to page 1
02S - 2

Remove the silicone joints before painting and reseal them once the enamel is applied. Wait at least 5 days to use the water zones. After 5 days, the surface can be washed with soft detergent. Do not use abrasive products, scourers or brushes as they could scratch the enamel film. Ceramic porous, rigid PVC, copper, melamine: directly apply 1 or 2 coats of Water Based Enamel for Bathroom and Kitchen Tiles In very humid environments, the sanding of the surface with sandpaper P280 greatly improves the adhesion. MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION: Wash, softly sand and...

Open the catalog to page 2

All Industrias titan sau catalogs and brochures

  1. M47

    2 Pages

  2. 06T

    2 Pages

  3. 080

    1 Pages

  4. 00C 4290

    2 Pages

  5. 024

    2 Pages

  6. 011

    2 Pages

  7. 089

    1 Pages

  8. 085

    1 Pages

  9. 08U

    1 Pages

  10. 082

    1 Pages

  11. 08L

    1 Pages

  12. 052

    2 Pages

  13. S45

    2 Pages

  14. M46

    2 Pages

  15. HIDRALUX

    2 Pages

  16. BLANCDUR

    2 Pages