*mynauticexpo

00C 4290

Product catalog summary

Product Overview:
TITANLUX Enamel Ceramic-Like Finish is a two-component enamel designed for both indoor and outdoor use, providing a satin finish. It is composed of acrylic polyol and aliphatic isocyanate, offering high durability, elasticity, and excellent resistance to weathering, chemicals, and wear. The product is non-yellowing and retains its gloss over time.

Fields of Application:
This enamel is ideal for renovating bathrooms and kitchens, including surfaces like lavatories, bathtubs, tiles, and appliances. It is also suitable for use on wood, melamine, iron, concrete, and aluminum, provided they are properly primed.

Technical Specifications:

Finish: Satin
Color: White
Density: 1.34 - 1.39 Kg/l
Coverage: 14 - 18 m²/l
Drying Time: 4 - 6 hours at 23ºC, 60% RH
Recoat Time: 12 - 24 hours at 23ºC, 60% RH
Mixing Ratio: Base 4 parts, Hardener 1 part
Pot Life: 4 - 8 hours at 23ºC
Application Methods: Roller, spray-gun, brush (small surfaces)
Cleaning: TITAN YATE Thinner
Application Temperature: +10ºC to +30ºC, RH <80%
Flash Point: Base 35ºC, Hardener 38ºC
Volume Solids: 52 - 54%
VOC: Max 500 g/l
Pack Size: 750 ml

Directions for Use:
Ensure surfaces are clean, dry, and prepared. For bare surfaces, apply appropriate primers based on material type. For maintenance, clean and sand surfaces before applying the enamel. Allow 72 hours before using treated bathtubs.

Precautions:
Read the label before use and refer to the Safety Data Sheet. Store in a cool, dry place, away from heat sources. Follow local waste management regulations and avoid environmental contamination.

Additional Information:
The product has a shelf life of 36 months in unopened packaging. The technical sheet is valid for five years from the issue date or until a new sheet is released. For any uncertainties, consult the technical service.

Catalog excerpts

TITANLUX ENAMEL CERAMIC-LIKE FINISH Indoors - Outdoors - Satin Description Two-component enamel. Based on Acrylic Polyol with high cross-linking grade and aliphatic isocyanate. Very hard and elastic. Excellent gloss retention and resistance to weathering, wearing, washes and chemicals (grease, petrol, gas-oil,etc. ). Non yellowing. Fields of Application Ideal for the renovation of bathrooms (lavatory, bathtubs, washbasins, tiles, screens, taps, etc) and for harmonious element matching (radiators, windows, cabinets, etc). It is also suitable for kitchens (fridges, washing machines, dishwashing machines and other electric appliances) and on surfaces of wood, melamine, iron, concrete, aluminium, etc., suitably primed. Technical Data Product Type Acrylic polyol and aliphatic isocyanate Mixing Rate Base: 4 parts, Hardener: 1 part Roller, spray-gun and brush (Application by brush is only recommended for small or narrow surfaces) Equipment Cleaning TITAN YATE Thinner Pack sizes Variations in temperature, humidity, thickness, tinting or surface type, etc. may lead to changes in drying, in coverage or in other properties. Directions for use GENERAL REMARK

Open the catalog to page 1

Thoroughly stir the contents in the can.The surfaces have to be clean, dry and suitably prepared. Remove any rest of dirt, grease, poorly adhered rust or old coats by using thinner or paint-stripper, depending on needs. BARE SURFACES: Wood:Sand the wood following the wood grain. Clean the surface, remove resin or resin secretion and smooth too sharp edges. Apply TITAN Protector, Sealing Primer, Multi-Usage Primer, or TITAN YATE Epoxy Primer, depending on needs. Iron and steel: After having washed the surface and removed rust, apply TITAN Multi-Purpose Primer or TITAN YATE Epoxy Primer, depending...

Open the catalog to page 2