Titan Boat Lifts Specifications Overview

Contact Information

Location: Ft. Myers, FL 33967-17030, Alico Center Rd.
Phone: (800) 669-3515
Fax: (239) 454-8641

Capacity and Load Specifications

• Lift Capacities: 75,000 lb, 100,000 lb, and 120,000 lb models available.
• All spacing measurements are to the center of piling.
• Recommended minimum pile size: 108 inches diameter.

Structural and Load Considerations

IMM Boat Lifts, Inc. disclaims responsibility for dock structure integrity or its ability to resist applied loads from the boat lift. Verification of the site and structure must be performed by a licensed marine contractor.

Applied load data can be provided upon request.

Mechanical and Electrical Specifications

• Winch Gear Ratio: 731:1
• Wire Rope: 1/2 inch 304 stainless steel, 6x37 construction
• Power Requirements:
  • Four 2 HP motors at 230V/32A, three-phase for larger lifts
  • Four 1.5 HP motors at 230V/28A, three-phase for smaller lifts
• Torque Specifications: 6 ft-lb and 10 ft-lb depending on model

Dimensional Notes

Dimensions B, C, and D are dependent on vessel and site specifics and are variable.
Typical piling diameter is 12 inches.

Materials and Components

• Wire ropes and cables use 304 stainless steel with 6x37 strand configuration.
• Structural components include 7/16 inch 304 stainless steel cables and various steel plates (e.g., 7 x .620 W, (8)12 x .310 H).

Important Recommendations and Limitations

• Site verification by a licensed marine contractor is mandatory to ensure safety and structural integrity.
• IMM Boat Lifts is not responsible for dock structure performance under load.
• All electrical components are three-phase and require appropriate power supply.