PWC 1500
PWC 1500
The document outlines the specifications for the PWC 1500 boat lift manufactured by IMM Quality Boat Lifts, located in Ft. Myers, Florida. The drawing number associated with this product is 600111.
- Capacity: 1,500 lbs
- Material: Tube dimensions are 6"x4"x.25" with a specification number #50A6077
- Cable: 7x19 304 stainless steel, 1/4 inch SSAC
- Electrical: 230V/5.5A and 3/4 HP motor at 115V/11A
IMM Boat Lifts, Inc. disclaims responsibility for the dock structure or its ability to resist the applied loads of the boat lift. It is recommended that the site be verified by a licensed marine contractor. Applied loads can be provided upon request.
- Height: 6 x .21 H
- Width: 4 x .35 W
- Length: 15'
- Other components: #50B9 60:14" Nylon with 1.9 O.D., 9 Gauge
- Dimensions: 48" x 72"
- Pipe: 1P 17', 10" diameter
Catalog excerpts
IMM BOAT LIFTS, INC. IS NOT RESPONSIBLE FOR THE DOCK STRUCTURE OR ITS ABILITY RESIST THE APPLIED LOADS OF THE BOAT LIFT. THE SITE SHOULD BE VERIFIED BY A LICENSED MARINE CONTRACTOR. APPLIED LOADS WILL BE PROVIDED UPON REQUEST. Notesi 1, Structure designed for loads associated with an ultimate wind speed of 170 MPH, exposure 'D', risk category 1, calculated for Florida Building Code P010, ASCE 7-10 and ADM-P005. P. Boats shall not be stored on lifts during high wind events. 3. All primary structural members to be 6061-T6 aluminum. 4. Tracks are to be driven to firm bearing material. 6. Lateral support for piles and attachment to piles shall be engineered by others for site specific conditions.
Open the catalog to page 1All IMM Quality Boat Lifts, Inc. catalogs and brochures
Elevator Superlift1 Page
Elevator Platinum1 Page
PWC 45001 Page
PWC 30001 Page
Trident1 Page
Beamless1 Page
Superlift 8 pile2 Pages
Superlift 4 pile2 Pages
Platinum 8 pile1 Page
Platinum 4 pile1 Page
Alumavator 8 pile1 Page
Titan Yacht Lift1 Page
Platinum Boat House Lift1 Page
Elevator Alumavator1 Page
Alumavator 4 pile1 Page
