Elevator Alumavator
1Pages

IMM QUALITY BOAT LIFTS ■ ELEVATOR SPECIFICATIONS 4,500# - 20,000# Vator STRUCTURAL ENGINEERING REVIEW THIS CONSTRUCTION HAS BEEN DESIGNED AS A MAIN WIND FORCE RESISTING SYSTEM, WITH CALCULATED GRAVITY AND WIND LOADS IN COMPLIANCE WITH THE FLORIDA BUILDING CODE 2014, CHAPTER 16, ADM 2010, AND ASCE/SEI7-10 "MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES" TO WITHSTAND THE WIND LOADS ASSOCIATED WITH AN ULTIMATE WIND SPEED OF 180 MPH, EXPOSURE ‘D”, RISK CATEGORY I. ARNOLD/SANDERS CONSULTING ENGINEERS HAS NO CONTROL OF THE MANUFACTURING, PERFORMANCE, OR INSTALLATION OF THIS PRODUCT. THESE GENERIC DESIGN FEATURES WERE ENGINEERED IN ACCORDANCE WITH ACCEPTED ENGINEERING PRACTICES BASED ON DATA PROVIDED BY THE MANUFACTURER. THIS STRUCTURAL REVIEW IS LIMITED TO THE PRIMARY FRAMING AND CONNECTIONS AND IS NOT INTENDED TO COVER MECHANICAL AND ELECTRICAL COMPONENTS. THESE DESIGN FEATURES ARE BASED ON STRUCTURAL CALCULATIONS, TITLED "STRUCTURAL CALCULATIONS FOR ELEVATOR", WHICH CONTAIN ADDITIONAL DESIGN REQUIREMENTS AND CRITERIA AND ARE AVAILABLE UPON REQUEST. THE BOAT LIFTS DEPICTED BY THESE DESIGNS AND RELATED CALCULATIONS WERE ENGINEERED AS MANUFACTURED PRODUCT FOR NON-SITE SPECIFIC USE AND SHALL MEET THE DESIGN REQUIREMENTS AND INSTALLATION LIMITATIONS LISTED IN THE STRUCTURAL CALCULATIONS - IN PARTICULAR THE TRACK BEAMS SHALL BE ADEQUATELY BRACED AT NO MORE THAN 5 FT. O.C.. J. L. SANDERS; P.E. Reg. Florida No. 66361 SIGNATURE NOT VALID WITHOUT RAISED SEAL IMM BOAT LIFTS, INC. IS NOT RESPONSIBLE FOR THE DOCK STRUCTURE OR ITS ABILITY RESIST THE APPLIED LOADS OF THE BOAT LIFT. THE SITE SHOULD BE VERIFIED BY A LICENSED MARINE CONTRACTOR. APPLIED LOADS WILL BE PROVIDED UPON REQUEST. 1. Structure designed for loads associated with an ultimate wind speed of 180 MPH, exposure #D#, risk category 1, calculated for Florida Building Code 2014, ASCE/SEI 7-10 and ADM-2010, 2. Boats shall not toe stored on lifts during high wind events, 3. All primary structural members to toe 6061-T6 aluminum. 4. Tracks are to toe driven to firm bearing material, 5, Wood piles shall comply with ASTM D25 and be southern pine, 2,5 cca marine grade pressure treated, 6, Lateral support for plies and attachment to piles shall toe engineered toy others for site GUIDE POST BUNK BOARD LENGTH DRIVE SHAFT SPROCKET Vator/Selectl Standard Speed DRIVE RATIO MOTOR HP/VOLTAGE SPEED in/min DRIVE RATIO High Speed MOTOR |hp/voltage| SPEED in/min IMM QUALITY — BOAT LIFTS---