Cylinder Pressure Sensor HTT-04® for On-line Combustion control Cylinder pressure sensor for on-line combustion control on diesel- and gas engines for increasing engine performance and optimised engine control. Characteristics • Designed life expectancy of 16,000 h • Digital electronic with event storing • Very good thermodynamic performance Application: Closed loop control on internal combustion engines e.g. knock detection, cylinder balancing, MIP calculation, start of combustion, NOx control HTT is a registered trademark of imes gmbh

General specifications Degree of protection Optimum sensor life is achieved at an average temperature at the measuring element of 200 - 250 °C. The life expectancy of the sensor has been designed so that the lifetime of 16.000 h or more can be achieved in a gas engine. at 1500 rpm. Mounting The sensor should be installed close to the combustion chamber, the length of the pressure bore between sensor and combustion chamber depends mainly on engine speed. Generally there are two possibilities for the installation position of cylinder pressure sensors: Head mounted or set-back mounted. Connector...

anriored stainless steel cable protection cable length: see chat f knai coidrooiiig nitrscu) Contact Atangefnert Pnoenix Connector Supply pos. input (see chart) pressure signa min. output... max. output = pressure range (see chat) signal zero point onty uaad tor calibration Optional Accessories Protection cover Connecting cable 5m Connecting cable 10m imes gmbh . dr-herbert-kittel-str. 2 . 87600 kaufbeuren .fon +49(0) 8341 96 61 73 0 . fax +49(0) 8341 96 61 73 18 e-mail: [email protected] . www.imes.de This information corresponds to the current state of knowledge. Liability for consequential damage...