Sidescan_Sonar_Kit

Sidescan_Sonar_Kit

Sidescan_Sonar_Kit

Product catalog summary
Hardware Specifications:
The Sidescan Sonar Kit features an RS-232 serial interface operating at 115.2 kbps, with an optional RS-485 interface. It operates at frequencies of 330 kHz and 800 kHz. The transducer beam width is 1.8° x 60° for 330 kHz and 0.7° x 30° for 800 kHz. Range resolution is determined by dividing the range scale by 250 for both sides displayed, and by 500 for a single side displayed. The power supply requirement is 10 – 16 VDC at a maximum of 300 mA. The weight of the transducers is approximately 300 g (0.7 lbs) each, and the electronics weigh about 70 g (0.2 lbs).
Software Specifications:
The software, Win881ss.exe, is compatible with Windows™ operating systems including Windows™ 95, 98, Me, NT, 2000, and XP. It supports side scan modes with range scales of 15 m, 30 m, 60 m, 90 m, and 120 m (50’, 100’, 200’, 300’, and 400’). The file format used is (filename).81s, and it accepts GPS input in NMEA 0183 formats: GLL, GGA, VTG, and RMC. The recommended minimum computer requirements include a 100 MHz Pentium processor, 16 MB RAM, 1 GB hard disk, and 800 x 600 x 256 color graphics. Win881ss.exe version 2.00 or higher is required for certain operating systems, with free upgrades available.
Ordering Information:
The kit is available in a 330 kHz / 800 kHz unit with remote mount transducers featuring a 24” pigtail. Options include RS-485, remote mount transducers with connectors, and remote mount faired transducers. Various connector and cable configurations can be specified upon ordering.
See more

Catalog excerpts

Sidescan_Sonar_Kit-1

Sidescan Sonar Kit 445-049 SEPTEMBER 2006 SIDESCAN SONAR KIT Transducers shown with optional connectors HARDWARE SPECIFICATIONS: INTERFACE FREQUENCY TRANSDUCER BEAM WIDTH RANGE RESOLUTION POWER SUPPLY ELECTRONICS DIMENSIONS TRANSDUCER DIMENSIONS WEIGHT: In Air Transducers Electronics RS-232 serial interface @ 115.2 kbps (or optional RS-485) 330 kHz / 800 kHz 330 kHz: 1.8° x 60° 800 kHz: 0.7° x 30° Both sides displayed: Range scale ÷ 250 Single side displayed: Range scale ÷ 500 10 – 16 VDC at 300 mA max. See drawing on p. 2 See drawing on p. 2 ~300 g (0.7 lbs) each (with 24” pigtail) ~70 g (0.2 lbs) SOFTWARE SPECIFICATIONS: Win881ss.exe WINDOWS™ OPERATING SYSTEM MODES RANGE SCALES Windows™ 95, 98, Me, NT*, 2000*, XP* Side Scan 15 m, 30 m, 60 m, 90 m, and 120 m (50’, 100’, 200’, 300’, and 400’) (filename).81s FILE FORMAT GPS INPUT (4800, N, 8, 1) NMEA 0183 FORMATS: RECOMMENDED MINIMUM COMPUTER REQUIREMENTS: GLL, GGA, VTG, RMC 100 MHz Pentium 16 MB RAM 1 GB Hard Disk 800 x 600 x 256 colour graphics * Requires Win881ss.exe v2.00 or higher (Free upgrade available for older versions – Contact Imagenex) Specifications subject to change without notice www.imagenex.com Copyright © 2006 - 2012 Imagenex Technology Corp.

 Open the catalog to page 1
Sidescan_Sonar_Kit-2

ORDERING INFORMATION: 330 kHz / 800 kHz UNIT with Remote Mount Transducers w/ 24” pigtail* RS-485 Remote Mount Transducers with connector* Remote Mount Faired Transducers Standard Option Option Option 881-000-157 -007 -026 -027 *Note: Various connector/cable configurations available to be specified upon ordering. Product and company names listed are trademarks or trade names of their respective companies. 2 Sidescan Sonar Kit 445-049 www.imagenex.com

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.