*mynauticexpo

DT100_Specs

1 / 3 PagesView full catalog

DT100_Specs

Product catalog summary

Hardware Specifications:

Frequency: 240 kHz
Swath Width: Transmit and Receive: 120° x 3°
Effective Beam Widths: Narrow: 0.75°, Medium: 1.5°, Wide: 3°
Number of Beams: Default: 480, Selectable: 240, 120
Range Resolution: 0.02% of range
Range: 60 m water depth, 100 m slant range
Min. Detectable Range: 0.5 m below transducer
Max. Operating Depth: 100 m
Interface to PC: Ethernet (10 base-T) using UDP
Max. Cable Length: 100 m on CAT5-e, longer with additional hardware
Connector: Underwater wet-mateable 8 conductor
Power Supply: 24 VDC nominal, 9 to 30 VDC range
Power Dissipation: <25 Watts total
Dimensions: 162 mm L x 117 mm H x 92 mm W
Weight: 8 kg in air
Materials: 316 Stainless Steel, Epoxy, Stainless Steel connector, available in Delrin housing
Ping Rate Example: 14 Hz at 20 m range with roll compensation on

Software Specifications:

Executable: DT100.exe
Operating System: Windows™ XP, Vista, 7
Display Modes: Sector, Linear, Perspective, Profile, Beam Test
Persistence (Trail): 1 – 300 seconds
Range Scales: 5 m to 100 m
Sector Sizes: 30°, 60°, 90°, 120°
File Format: RAW DATA (.837), PROFILE POINT (.83P)
Recommended Minimum Computer Requirements: 2 GHz Pentium 4, 256 MB RAM, 20 GB Hard Disk, 1024 x 768 screen resolution

Ordering Information:

100 m Unit: Standard 837B-000-440
IP Address Option: -020 (Standard IP Address is 192.168.0.2)
Dual Head Software Option: -024

Catalog excerpts

Open the catalog to page 1

HARDWARE SPECIFICATIONS: FREQUENCY SWATH WIDTH (nominal beam geometry) EFFECTIVE BEAM WIDTHS NUMBER OF BEAMS RANGE RESOLUTION RANGE MIN. DETECTABLE RANGE MAX. OPERATING DEPTH (Submersion depth) INTERFACE TO PC MAX. CABLE LENGTH CONNECTOR POWER SUPPLY DIMENSIONS WEIGHT: In Air MATERIALS POWER SUPPLY/ JUNCTION BOX PING RATE (PRF) EXAMPLE 240 kHz Transmit: 120° x 3° Receive: 120° x 3° Narrow: 0.75° Medium: 1.5° Wide: 3° Default: 480 Selectable: 240, 120 0.02% of range 60 m (197’) water depth 100 m (328’) slant range 0.5 m (1.6’) below transducer 100 m (328’) Ethernet (10 base-T) using UDP 100 m...

Open the catalog to page 2

ORDERING INFORMATION: 100 m UNIT IP Address* Dual Head Software Standard Option Option 837B-000-440 -020 -024 *Note: Standard IP Address is 192.168.0.2 A different IP Address may be specified upon ordering. Product and company names listed are trademarks or trade names of their respective companies. 3 DT100 445-080 www.imagenex.com

Open the catalog to page 3

DT100_Specs

DT100_Specs

Catalog excerpts

All Imagenex Technology Corp. catalogs and brochures