831L_Pipe_Profiling_Specs_rev1
2Pages

{{requestButtons}}

Catalog excerpts

831L_Pipe_Profiling_Specs_rev1 - 1

831L Pipe Profiling 445-061 APRIL 2009-REVISED SEPTEMBER 2011 IMAGENEX MODEL 831L DIGITAL PIPE PROFILING SONAR APPLICATIONS: • • • Profiling Pipeline Inspection Scientific Research FEATURES: • • • • • • • • • Ethernet Programmable High performance Scans 360° in 1.3 sec (up to 1 m range) Low power 0.125 m to 6 m operation (full scale) Compact size Communication format available to user Built in Pitch/Roll sensor HARDWARE SPECIFICATIONS: POWER SUPPLY DIMENSIONS WEIGHT: In Air 2.25 MHz Profiling type, fluid compensated 1.4° conical 1/250 of full scale range (e.g. 1 mm at 250 mm) 50 mm (~ 2”) 1000 m Standard: 100 m on CAT5e Cable length may be increased up to ~9000 m using an Ethernet extender. Please enquire for more information. Standard: 10 Mbps Ethernet (10 BASE-T) using TCP/IP Bit rate may vary if an Ethernet extender is in use. End mounted, eight conductor, wet mateable (Subconn MCBH-8M-SS) 20 – 32 VDC at less than 5 Watts 61 mm (2.4”) diameter x 343 mm (13.5”) overall length 1.2 kg (2.6 lbs) In Water MATERIALS FINISH 0.4 kg (0.8 lb) 6061-T6 Aluminum & Polyurethane Hard Anodize FREQUENCY TRANSDUCER TRANSDUCER BEAM WIDTH RANGE RESOLUTION MIN. DETECTABLE RANGE MAX. OPERATING DEPTH MAX. CABLE LENGTH INTERFACE CONNECTOR Specifications subject to change without notice www.imagenex.com Copyright © 2009 - 2012 Imagenex Technology Corp.

Open the catalog to page 1
831L_Pipe_Profiling_Specs_rev1 - 2

SOFTWARE SPECIFICATIONS: PipeSonarL.exe WINDOWS™ OPERATING SYSTEM MODES RANGE SCALES Windows™ 98, Me, NT, 2000, XP, Vista Polar 0.125 m, 0.25 m, 0.50 m, 0.75 m, 1 m, 2 m, 3 m, 4 m, 5 m, 6 m Continuous rotation, 9° increments 0° – 351°, 9° increments, or Continuous rotation 0.9° Polar and rectangular (filename).31L 2 GHz Pentium 4 256 MB RAM 20 GB Hard Disk 1024 x 768 screen resolution TRAIN ANGLES SECTOR SIZE STEP SIZE GRID TYPES FILE FORMAT RECOMMENDED MINIMUM COMPUTER REQUIREMENTS: ORDERING INFORMATION: 1000 m UNIT IP Address* Standard Option 831L-000-200 -020 *Note: Standard IP Address...

Open the catalog to page 2

All Imagenex Technology Corp. catalogs and brochures

  1. 881A

    68 Pages

  2. 881L

    53 Pages

  3. DT100_Specs

    3 Pages

  4. 851_Specs

    2 Pages