REMO is a multipurpose system for monitoring the operating conditions of devices. REMO makes the user defined measurements and works automatically after initial settings have been made. In case of a malfunctioning device an alarm is sent over TCP/IP -network (also wireless is possible) or as an SMS text message. The measured data can be moved to a monitoring location over the network for further review, and the functioning of the device can be also monitored in real-time. Fault detection, while measuring sound or vibration, is based on neural computation or spectral analysis with alarm levels. Alarm levels can also be set for measurement values such as temperatures, voltages and states. There are two parts to the /?£MO-system. A very small measuring unit is placed near the target device. It is contacted by remote monitoring software, that is installed on a regular office computer. Notice the benefit of the system: One remote monitoring software can monitor several measuring devices and similarly one device can be monitored from several locations. This also enables easy scalability by just adding measuring units. Measured signals: Remote Monitoring software user interface: -Audio - Regl time monitoring of signols (listening) - Imgge - Spectral gnd time-series views -Vibration - Wotching video (surveillonce) -Temperature - Algrm limits for oil signgls - Voltoge/current - Re-tegching of foult detection - Stote-informotion - Status of monitored devices in a tree structure REMO measuring unit features: - Versatile interfaces - Self diagnostics - Protective metal casing - Reliable operation: No moving parts - Intelligent algorithms (e.g. neural computation) REMO measuring unit interfaces: - Analog inputs 4x2 channels - Digital I/O: 3 inputs, 1 output Chanced trj WtfiNM jtatr E-mail: [email protected]