Industrial Electronic Device
4Pages

{{requestButtons}}

Catalog excerpts

Industrial Electronic Device - 1

Industrial Electronic Devices Industrial LCD Displays FPM-64 and FPM-64T MultiSync LCD Monitor 6.4” TFT Class Display The FPM-64 and FPM-64T [“T” designating Touch Screen] are ruggedly built industrial display products suitable for factory floor environments. The mounting bezel is sealed to NEMA (National Electrical Manufactures Association) specifications and provides a dust and liquid tight seal when installed in a suitable enclosure. The bezel is finished with a tough baked on powder coat that is resistant to scratches and most chemicals and will look good for years. Special colors and finishes are available. Offering simple installation and easy setup, all FPM-64 series displays are plug compatible with your standard computer video card. Screen setup is simplified with digital side mounted controls [to avoid tampering] and On Screen Display . After setup all video settings are stored in the units non volatile-memory and will be retained during power down conditions. The FPM-64 provides full screen display of VESA (Video Electronic Standards of America) resolutions of VGA (640x480), the LCD’s native resolution. Incorporating a high quality LCD, FPM-64’s are suitable for harsh lighting conditions and off angle viewing. The FPM-64T is fitted with a high resolution analog resistive touch screen. Available either as a serial RS-232 interface or a PC bus card, the touch screen provides a mouse emulation, supporting Click, Double Click, and Click and Drag, including Right Click functionality! IED Model FPM-64T 6.4” VGA Touch Screen Monitor The ventilated chassis is formed from 16 Ga. (.062) Stainless Steel, for strength and corrosion resistance. For easy service the rear of the unit hinges down and where ever possible aircraft style vibration resistant fasteners are used for assembly. The bezel is milled from .250” thick 6061 Aluminum plate. The radiused edge and corners are milled to reduce dust collection and give an attractive look to a very rugged package. Revised and Updated 5/00

Open the catalog to page 1
Industrial Electronic Device - 2

General Specifications: Models FPM-64 and FPM-64T Liquid Crystal Display (LCD) Display Size / Type 6.4” Diagonal / TFT Active Matrix Active Area 5.14”(h) x 3.82”(v) Pixel Format 640(h) x 480(v) Brightness 300 Nits Typical Contrast Ratio 100:1 Viewing Angle (Horizontal) 70 / 70 Deg Viewing Angle (Vertical) 70 / 40 Deg. Back Light Life 50,000 Hours (Half Life) Colors Supported 256,000 Mechanical Construction Bezel Outside Dimension 9.5”(h) x 7.0”(v) Bezel Material .250” 6061 Aluminum Bezel Finish Black Powder Coat Front End Construction NEMA 4/12 Chassis Depth (Behind Cabinet Door) 2.125”...

Open the catalog to page 2
Industrial Electronic Device - 3

Model FPM-64(T) Panel Cut Out and Mounting Information

Open the catalog to page 3
Industrial Electronic Device - 4

Standard LCD Monitor Configurations Part Number Delivery FPM-64 FPM-64T FPM-64/RM FPM-64T/RM FPM-104 FPM-104T FPM-104/RM FPM-104T/RM FPM-120/OF FPM-120 FPM-120T FPM-120/RM FPM-120T/RM FPM-140/OF FPM-140 FPM-140T FPM-140/RM FPM-140T/RM FPM-150/OF FPM-150 FPM-150T FPM-150/RM FPM-150T/RM FPM-180 FPM-180T FPM-180/RM FPM-180T/RM FPM-200 FPM-200T S S 2 2 S S 2 2 S S S 2 2 S S S S S S S S 2 2 S S S S 2 2 Description VGA 6.4" LCD Panel Mount 6.4" LCD Panel Mount Touch 6.4" LCD 19" Rack Mount 6.4" LCD 19" Rack Mount Touch 10.4" LCD Panel Mount 10.4" LCD Panel Mount Touch 10.4" LCD 19" Rack Mount...

Open the catalog to page 4

All IED catalogs and brochures

  1. ARM-215[T]

    2 Pages

  2. ARM-12T

    2 Pages

  3. ARM-15T

    2 Pages

  4. ARM-19T

    2 Pages

  5. FPM-196

    3 Pages

  6. FPM-190_195

    3 Pages

  7. FPM-154_155

    2 Pages

  8. IWS-124T

    4 Pages

Archived catalogs