I n te g ra te d Sys te m nt grat ed ys te Dual Display ua ay Simple Installation mp le In ta ll ti on

Command - Your Way, Communications and Navigation Setup System overview The MarineCommander™ is Icom's marine navigation system, which integrates various marine modules such as a fish finder, marine radar, AIS and VHF transceiver into the multi-function displays (MFD). Up to two MFDs can be connected to a main processor unit (MPU) and support separate dual display operation. If connecting two MarineCommander MPUs via a data cable, up to four MFDs can be used and the connected modules (E.g. fish finder, radar) can be shared with the other MFDs. I Affordable Dual Display Connection | Up to Four...

larine Radar Fish Finder The MXR-5000R/T marine radar provides clear target discrimination. Waypoint and AIS target can be overlaid on the radar screen. The marine radar helps collision avoidance and increases your safety at sea. The radar images can be overlaid on the plotter screen in the same scale and helps you to detect dangerous objects. When a fish finder module is connected, the MarineCommander system can have a dual frequency sounder function. Using the 50kHz/200kHz dual frequency mode, the MarineCommander enhances the separation and helps in fish detection. ATA detail is shown on the...

Specifications Unit:mm (inch) Main processor unit MXP-5000 12/24V DC (10.8 to 31.2V DC) Less than 4.7A (One MXD-5000) Less than 7.7A (Two MXD-5000s) Fish Finder Output power Transmission frequency Dimensions (W×H×D) (Projections not included) Weight (approx.) Usable temperature range Waterproofing Optional data cable Frequency range (Unit:MHz) Type of emission Power supply requirement Dimensions (Projections not included; WxHxD) Weight (approx.) Transmit Current drain Receive Sensitivity Intermodulation rejection RF output power Waterproofing Data interface GPS Receiver Receiving frequency Receiving...

Wiring Diagram Transducers EX-3193 600W Transom type Open array scanner MXR-5000T Radar main unit Radar main unit Fish Finder unit MXF-5000 Explanatory notes Video in (Onboard camera) NMEA 2000 instruments Data cable Display cable Main processor unit MXP-5000 Radar system cable External Display Transducer cable GPS cable NMEA 0183 NMEA 2000 Multi-function display MXD-5000 *1 When the MXG-5000S GPS receiver is connected to the MXP-5000 through the MA-500TR or MXA-5000, this GPS receiver is not required. *2 Some versions of IC-M506 do not have a NMEA 2000 connector. The IC-M506/EURO cannot be used...