Catalogs >
Icom >
IC-718

IC-718
4Pages

Catalog excerpts

Front mounted loud speaker Microphone compressor The IC-718 has a speaker mounted on the front panel. With the speaker facing the operator, audio sounds can be clearly heard without impediment during operation. It is no longer necessary to manually increase the volume to try and capture audio sounds. The IC-718 has a low distrotion microphone compressor. This feature compresses microphone audio input to increase average audio output level. The result is, that talk power is increased. This function is effective for long distance communication, or when propagation conditions are poor....

Open the catalog to page 2

Flexible lter selection Selectable antenna tuner An optional IF filter can be installed into the transceiver to suit your operating preference. Either the AT-180 or AH-4 optional antenna tuner can be used with the IC-718 to suit your installing conditions, or operating style. Of course, the AH-4 control circuit is built into the IC-718. [dB] AF OUTPUT communicate over long diseven to the other side of the ormance found in the IC-718 , high C/N ratio, and full duty g these contacts easy. Expee latest RF and digital techand simplied operation. You he most practical rig you will 0 –10 FL-257...

Open the catalog to page 3

• Frequency range ''Guaranteed range: 0.5-29.999999 MHz *Jvanes according to version •Weight (approx.) » REMOTE connector • Frequency resolution • Frequency stability : 101 (99 regular, 2 scan edges) : Less than ±200 Hz from 1 min. to 60 min. after power ON. After that rate of stability less than ±30 Hz/hr. • Power supply requirement: 13.8 V DC ±15 % (negative ground) • Operatable temp, range •Antenna connector • Modulation system • Output power • Spurious emissions "spurious freq.; below 30 • Carrier suppression • Unwanted sideband • Microphone connector • SEND connector Balanced...

Open the catalog to page 4