Catalogs >
HYUNDAI Marine Engines >
Marine Gearbox

Marine Gearbox
8Pages

Catalog excerpts

Building a better future- Global Leader www.hyundai-engine.com Technical Alliance MARINE GEARBOX / HYUNDAI I ENGINE & MACHINERY HEAVY INDUSTRIES CO.,LTD.

Open the catalog to page 1

Hyundai Marine Gearbox Hyundai Marine Gearboxes have been designed to be specially fitted to work-boats such as tugs, special bulk carriers, container vessels, ferries, etc. The Gearboxes can be selected according to the propulsion types (CPP or FPP) and vessel types for high performance demands. We have developed the Marine Gearboxes to be suitable for common 4-stroke engines as well as HHI-EMD HiMSEN Engines. ► Type Approval Certificates have been issued: ► Applied design standards & rules: Gearbox Specifications Gearboxes for CPP (CPGV models) Gearboxes for FPP (FPGV models) ► In the...

Open the catalog to page 2

Light-weight and robust design High operating reliability ► Case-hardened and finely ground gear teeth for excellent durability and smooth operating ► Smooth and reliable hydraulic clutch shifting ► Reliable bearings (SKF CARB, SRB, CRB, etc) for astern & ahead running ► Rapid and close technical service HiMSEN Engine System Configuration Designed to have maximum safety (optimized casing stiffness) Extra long life and high reliability Smooth and reliable hydraulic shifting ► Lubrication and Cooling System Guarantee the reliable and excellent operating performance Hyundai Marine Gearbox

Open the catalog to page 3

Marine Gear Technology Design & Analysis All the gearbox components are fully simulated to verify the actual behavior design by using the professional Computer Aided Engineering S/W. Analysis Model of the Gearbox System Analysis Result of the Gearbox System (Ahead Running) Analysis Result of the Gearbox System (Astern Running)

Open the catalog to page 4

Performance Test Gear tooth contact patterns have been verified after full loaded run test and these are compared with the simulated patterns. The tooth contact is patched on the middle of the tooth flank by gear micro-geometry optimization. Vibration and Noise Measurement During Running Test Gear Tooth Contact Verification After Loaded Test To verify the operating vibration and noise, a Hyundai Marine Gearbox was connected between the HHI-EMD HiMSEN Engine and the Hydro-Dynamometer. The gearbox was fully loaded and tested according to the Class Rules. Loaded Gearbox Test with HiMSEN Engine...

Open the catalog to page 5

Technical Alliance A HEAVY INDUSTRIES CO.,LTD. / JaKe's gearboxes can also be used Generator Gearbox Winch Gearbox Cutter Gearbox Propulsion Gearbox Inboard Dredge Pump Gearbox Submerged Dredge Pump Gearbox Jahnel-Kestermann Getriebewerke GmbH (JaKe) became a member of Standard Gear PGHC-630 with Horizontal Offset PGH-1100 with Horizontal Offset

Open the catalog to page 6

TYPE APPROVAL CERTIFICATE This Certificate consists of 3 pages This is to certify that the Reduction Gear for Diesel Propulsion with type designations) Hyundai Heavy Ind. Co. Ltd. (Engine & Machinery Ulsan, Republic of Korea is found to comply with Det Norske Veritas' Rules for Classification of Ships/High Speed and Light Craft Input torque Input speed Reduction ratio Local Office This Certificate is valid until Philip Christiansson TYPE APPROVAL CERTIFICATE This Certificate consists of 3 pages This is to certify that the Reduction Gear for Auxiliary Purpose with type designation (Engine &...

Open the catalog to page 7

North America Middle East/Africa HEAVY INDUSTRIES CO.,LTD. ENGINE & MACHINERY HEAD OFFICE (KOREA) Dong-gu, Ulsan, Korea, 682-792 E-mail: pump@hhi.co.kr SEOUL OFFICE (KOREA) 140-2, Gyo-dong, Jongno-gu, Seoul, 110-793 Contents subject to change without prior notice.

Open the catalog to page 8