H35/40G(V)
6Pages

Catalog excerpts

www.hhi.co.kr www.hyundai-engine.com Global Leader www.hyundai-engine.com HiMSEN H35/40GGas Engine We build a better future AHYUNDAI I ENGINE & MACHINERY HEAVY INDUSTRIES 1000, Bangeojinsunhwan-doro, Dong-gu, Ulsan, Korea Marine Engine & Machinery Sales Department Tel. : +82-52-202-7281 E-Mail : enginesales@hhi.co.kr Engine Power Plant Department Tel: 82-52-202-7041 E-mail: k120hhi@hhi.co.kr HHI-EMD Korean-English 24/7 Call Center +1-212-845-9803 Anytime, Anywhere, Any matters Easy and convenient access! (Korean-speaking agent is available during Korean business hours) v ____J

Open the catalog to page 1

Earth Friendly Engine HiMSEN family has been successfully launched into the market since 2001 thanks to support and cooperation from many owners, shipyards and classification societies. We would like to express our sincere gratitude to the everyone involved in this enterprise. And we hope that you have good business with our HiMSEN engines. >> Design Philosophy H35/40G(V) of HiMSEN Family has simple and smart design which is suitable for power generation application with gas fuel with high reliability and performance. The key features are: Economical and Ecological Engine with higher...

Open the catalog to page 2

>> Engine Block Engine Type Remark •The alternator outputs are calculated for an efficiency of 96.5% ~ 97%. The engine block is made of monoblock cast iron and has the combustion air chamber and lubricating oil channel. There is no need for maintenance normally except for cleaning in side air chamber and outside. And also this is of stiff and reliable to internal and external forces. The main bearing and main bearing cap for the underslung crankshaft are carried in heavy duty supports tightened hydraulically by two vertical main bearing studs and two horizontal side studs. There are covers...

Open the catalog to page 3

The camshaft is of a split type for each cylinder. And each camshaft is jointed by screws. Each piece of camshaft has an intake cam and an exhaust cam. The surface hardening is done for the each cam profile. The gear wheel for driving the camshaft as well as the gear wheel for connection of governor drive are mounted on the flywheel side. The extreme miller timing for intake cam has been applied to reduce NOx emission and prevent knock combustion. The front end block is located on the free end of the engine. Pipes for cooling water and lubricating oil system as well as pumps are modularized...

Open the catalog to page 4

>> Engine Automation H35/40G(V) Gen-sets provide automation system for engine safety, control and indicating based on programmable logic controller. The system is independently installed in each engine and also can be connected to the remote system, for example main switch board of engine control room via hard wired communication cables. In addition to fulfill the reliable operation under the environmental legislation and optimum combustion, following functions should be conducted by ECS. - Safety / Monitoring - Start / stop control - Speed / power control - Air fuel ratio control - Knock...

Open the catalog to page 5

Tallinn B Klaipeda Hamburg Rotterdam La Spezia Istanbul ■ Napoli Yoko hama Qingdao Shanghai Busan Santo Domingo Barbados World Wide HYUNDAI■ HHI-EMD Direct Service Center ■ Cooperative Repairer I Authorized Repairer H Spare Parts Depot■ Parts Sales Agent I 10 I

Open the catalog to page 6