Cargo Pumping System Hydraulically Driven
11Pages

HHI — UuiLding a better future Global Leader A HYUNDAI ENGINE & MACHINERY HEAVY INDUSTRIES CO.,LTD.

Introduction Introduction As one of the leading engine builders in the world, the Engine and Machinery Division of Hyundai As one of the leading engine builders in the world, the Engine and Machinery Division of Hyundai Heavy Heavy Industries Co., Ltd. (HHI-EMD) has supplied a variety of industrial pumps for Power Plants since Industries Co., Ltd. (HHI-EMD) has supplied a variety of industrial pumps for Power Plants since 1979 and 1979 and cargo oil pumps driven by steam turbine for Oil Tankers since 1995, respectively, to the cargo oil pumps driven by steam turbine for Oil Tankers since...

Hi-Well Cargo Pumping System Major Supply Equipment Optional Equipment - Hi-Well cargo pump - Hydraulic power Unit - Control system - Ballast pump - Portable pump with winch - Tank cleaning pump - Hydraulic oil transfer pump - Cargo heater - Diffuser - Hydraulic piping and fittings - Side thruster Other Consumer Hydr. Oil Press Line Hydr. Oil Line Pilot Line Hydr. Oil Control Unit Tank Cleaning Pump Portable Pump Cargo Pump Ballast Pump Side Thruster

Pump Selection Chart Pump Dimensions Optimum pump capacities are achieved by selecting high efficiency models for the customer’s requirements of flow rates, heads and others. We provide customers with a proposal for a complete Hi-Well Cargo Pumping System based on customer’s information about total tank volume, total discharge rates, total head and others. Pump length E shall be determined by shipyard. Middle support is designed to fix the horizontal movement of pipestack, and the number of the mid supports is determined by considering the pump length. B Pump Material The standard material...

Hi-Well Cargo Pump Sectional Drawing Hi-Well Cargo Pump is beneficial to customers providing reliable operation and safety for vessel, efficient cargo stripping and tank cleaning. Pumps are supplied either as one complete set or two parts based on the pump height and for easy installation. Pumphead is connected to the pipestack with flanged joint. Hydraulic motor is installed inside the pumphead, and a short pump shaft is supported by two bearings and sealed by two mechanical seals and connected to the pump impeller. The pump consists of a volute casing and a single suction impeller....

Cargo pump should be installed at the stern side of each tank of port or starboard to allow optimal cargo discharge. Hi-Well Cargo Pump can be started from the remote control panel or the local control valve. Through the PFC block on the pump top plate, pump always runs at the maximum discharge flow rate without regulating of discharge valve. According to the discharge loads, the pump speed is changed by the hydraulic motor. Hydraulic power package sustains the best operating conditions irrespective of the type of cargos. Power consumption is automatically matched to the discharge...

Ballast Pump Portable Cargo Pump Hi-Well BALLAST PUMPS are installed in one of the ballast tank, and the pump room is not necessary. The pumps are equipped with the self priming system for good operation, installation and easy maintenance. Hi-Well portable cargo Pump with air motor driven winch is supplied for emergency or stand-by. The winch will be used to lift the portable cargo pump and cargo heater for maintenance. Feature - Pump room is not necessary - Simple installation and maintenance - Self priming system Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless...

Hydraulic Power Unit   Electro-hydraulic Control System   Hi-Well HYDRAULIC POWER Unit is built as a central hydraulic ring line system in closed loop where hydraulic pumps deliver oil to a main pressure line. The hydraulic pack consists of main hydraulic pump, electric motor, and/or diesel engine, feed pump, cooling-filtering-heating units, control valve and accessory. The Independent load control of cargo pumps and side thruster connected to main close loop hydraulic system is generally arranged both remotely and locally. The main hydraulic pumps are of axial piston type, swash plate...

Hydraulic Piping Cargo Heater Hi-Well Hydraulic Piping covers full range of materials, components and services from engineering to testing, installation and commissioning of a complete piping system. We supply customers with hydraulic piping as prefabricated spools. Prefabrication provides the basis for a fast and easy, high quality installation of even the most complex piping systems.   The pipe material selection is based on customer’s specification and/or our recommendation. The use of cold drawn pipes and tubes is recommended and all pipes are cold worked because of both quality and...

HHI operates four renowned in-house institutes. They have all kinds of hydrodynamic facilities and are equipped with advanced analyzing equipment and powerful simulation facilities. The comprehensive R&D activities of the institutes comprise all pre-production phases including computer-aided design and the following: - Performance simulation of the pumps and industrial machinery - Flow dynamic analysis - Structure analysis - Analysis of Noise and vibration They play a vital role in the advancement of production technologies such as welding, casting, and plastic Vibration / Structure...

www.hhi.co.kr www.hyundai-engine.com 1000, Bangeojinsunhwan-doro, Dong-gu, Ulsan, South Korea Marine Engine & Machinery Sales Dep’t (Domestic) Tel : +82-52-202-7291 ~ 9 E-mail : k110@hhi.co.kr Marine Engine & Machinery Sales Dep’t (International) HHI-EMD Korean-English 24/7 Call Center +1-212-845-9803 Anytime, Anywhere, Any matters Easy and convenient access! (Korean-speaking agent is available during Korean business hours) K01-066-03 MAR. 2014 Contents subject to change without prior notice. copyright ⓒ 2014 Hyundai heavy industries