*mynauticexpo

Catalogs
Hyster
H10-16XM-6-12

H10-16XM-6-12

Product catalog summary

Technical Guide Overview
This guide provides comprehensive specifications and operational guidelines for the H10-16XM-6-12 series forklifts by Hyster, covering dimensions, performance, engine specifications, and safety standards.

Specifications

Manufacturer: Hyster
Models: H10XM-12, H13XM-6, H14XM-6, H16XM-6
Powertrain: Diesel
Operator Type: Seated
Rated Capacity: 10,500 kg to 16,500 kg
Load Centre Distance: 600 mm to 1,200 mm

Dimensions

Wheelbase: 3,300 mm
Overall Length: 6,828 mm to 7,438 mm
Overall Width: 2,541 mm
Height of Overhead Guard: 3,053 mm to 3,295 mm

Performance

Travel Speed: Up to 29 km/h
Lifting Speed: 0.41 m/s to 0.46 m/s
Gradeability: Up to 46%

Engine Specifications

Engine Manufacturer: Cummins
Model: QSB 6.7
Power Output: 122 kW
Torque: 732 Nm at 1,500 rpm

Safety and Compliance

Conforms to EU and ANSI standards
Includes safety features such as powertrain protection and hydraulic system temperature protection

Features and Options

Various mast tilt options
Hydraulic systems with different capacities
Multiple tire options including pneumatic and solid tires

Notes

Specifications are subject to change based on vehicle condition and operating environment.
Operators must be trained and follow the operating manual instructions.

Specifications and Options
The document details specifications and optional features for Hyster equipment, including carriages, forks, operator compartments, and ergonomic features. Customization options are available through the Special Products Engineering Department (SPED).

Handling Equipment
Includes dual function sideshift carriages, high load backrests, and various fork types for different applications, such as lumber.

Ergonomics
Features include open and full steel cab operator compartments, various seat options, climate control, and visibility enhancements like tinted windows and wipers.

Visibility and Operation
Options for exterior mirrors, camera systems, work lights, and alarms to enhance safety and operational efficiency. Includes systems for asset management and load weighing.

Appearance and Supplemental Features
Custom paint options, hazard warning striping, and literature packages. Warranty details offer 12 months or 2,000 hours coverage.

Front End Equipment
Details on the range of masts and forks, including pin type and hook type options.

Company Overview
Hyster provides a comprehensive range of material handling equipment and services, emphasizing a partnership approach to meet diverse operational needs. Local support is available through a network of trained dealers, offering finance packages and maintenance programs.

Contact Information
Hyster Europe is based in Frimley, Surrey, UK, with contact details provided for further inquiries.

Catalog excerpts

H10-16XM-6-12 SERIES TECHNICAL GUIDE STAGE IV

Open the catalog to page 1

Pin type carriage with fork positioner Pin type integral sideshift frame carriage with fork positioner ^ = Centre of gravity of unladen truck Ast = Wa + x + l6 + a (if bi2/2 < bi3) a = Minimum operating clearance = i0% of Ast (VDI standard = 200 mm BITA recommendation = 300 mm) l6 = load lengths Dual function sideshift carriage with fork positioner p Jl

Open the catalog to page 2

H10XMS-12 / H16XM-6 SPECIFICATIONS < PERFORMANCE DIMENSIONS WHEELS WT. GENERAL (1) Based on Stage IV engine and standard pin type carriage (2) Travel speed unladen limited at 25 km/h as factory default (1) Based on Stage IV engine and standard pin type carriage (2) Travel speed unladen limited at 25 km/h as factory default

Open the catalog to page 3

> MAST AND CAPACITY INFORMATIONH13XM-6 - H14XM-6 RATED CAPACITY KG@ 600 MM LOAD CENTRE NOTES: Specifications are affected by the condition of the vehicle and how it is equipped, as well as the nature and condition of the operating area. Inform your dealer of the nature and condition of the intended operating area when purchasing your Hyster® truck. (1) Based on Stage IV engine and sideshift frame carriage (2) Travel speed laden limited at 25 km/h as factory default (3) Stage IV engine based on low mount exhaust All capacities are according to EN1551. NOTICE: Care must be exercised when handling...

Open the catalog to page 4

FEATURES AND OPTIONS < PERFORMANCE HANDLING (continued) *Standard or optional in selected markets. Other options available through Special Products Engineering Department (SPED). Contact Hyster for details.

Open the catalog to page 5

FRONT END EQUIPMENT RANGE OF 2 STAGE NFL MASTS FRONT END EQUIPMENT 2496MM PIN TYPE CARRIAGE WITH SIMULTANEOUS AND INDEPENDENT FORK POSITIONER (FOR LUMBER APPLICATIONS) 2496MM PIN TYPE CARRIAGE WITH SIMULTANEOUS AND INDEPENDENT FORK POSITIONER RANGE OF PIN TYPE AND HOOK TYPE FORKS 2496MM PIN TYPE INTEGRAL SIDESHIFT FRAME CARRIAGE 2496MM PIN TYPE STANDARD CARRIAGE 2498MM QD HOOK TYPE DUAL FUNCTION SIDESHIFT WITH SIMULTANEOUS AND INDEPENDANT FORK POSITIONER

Open the catalog to page 6

STRONG PARTNERS. TOUGH TRUCKS. FOR DEMANDING OPERATIONS, EVERYWHERE. Hyster supplies a complete range of warehouse equipment, IC and electric counterbalanced trucks, container handlers and reach stackers. Hyster is committed to being much more than a lift truck supplier. Our aim is to offer a complete partnership capable of responding to the full spectrum of material handling issues: Whether you need professional consultancy on your fleet management, fully qualified service support, or reliable parts supply, you can depend on Hyster. Our network of highly trained dealers provides expert, responsive...

Open the catalog to page 7

H10-16XM-6-12

H10-16XM-6-12

Catalog excerpts

All Hyster catalogs and brochures

Archived catalogs