1. Catalogs
  2. Hyster
  3. E1.6-2.0XN

E1.6-2.0XN

E1.6-2.0XN

E1.6-2.0XN

Product catalog summary
Overview: The document provides detailed specifications and features of the Hyster E1.6-2.0XN series, which are four-wheel electric counterbalanced lift trucks designed for handling loads between 1,600 kg and 2,000 kg. These trucks are equipped with advanced features to enhance performance, reliability, and operator comfort.
Specifications: The trucks are powered by electric batteries and feature a seated operator type. Key specifications include a rated load capacity of up to 2,000 kg, a load center distance of 500 mm, and a wheelbase of 1,220 mm. The service weight varies from 3,414 kg to 3,719 kg depending on the model.
Performance Data: The trucks offer travel speeds of up to 18.4 km/h and lift speeds ranging from 0.47 to 0.72 m/sec. They are equipped with hydraulic service brakes and feature AC motor technology for traction and hoist, ensuring efficient load handling and reduced downtime.
Ergonomics: The operator compartment is designed for comfort, featuring a full suspension seat, adjustable steering column, and a mini-lever module armrest. The trucks also include a 'heads-up' display for easy monitoring of operating conditions.
Productivity and Dependability: The robust mast design and strong chassis construction enhance durability and stability. The trucks are equipped with a CANbus communications network and IP65 protection for increased reliability. Selectable performance settings allow for customization based on application needs.
Serviceability: The trucks feature a 1,000-hour service interval and easy access to key components for maintenance. Diagnostic information is readily available through the display or a plug-in point on the steering column.
Options and Features: Available options include mini-levers, integral sideshift, load weight indicator, impact sensor, and more. The trucks are designed to offer low cost of ownership with extended battery life and efficient maintenance planning.
Conclusion: Hyster's E1.6-2.0XN series offers a reliable and efficient solution for material handling needs, with a focus on operator comfort, productivity, and low operational costs. The trucks are supported by a network of trained dealers providing local support and maintenance services.
See more

Catalog excerpts

E1.6-2.0XN-1

FOUR-WHEEL ELECTRIC COUNTERBALANCED LIFT TRUCKS E1.6-2.0XN 1 600-2 000 KG

 Open the catalog to page 1
E1.6-2.0XN-2

DISTINGUISHING MARKS Rated capacity/rated load Electric (battery) Electric (battery) Operator type: hand, pedestrian, standing, seated, order-picker Electric (battery) Drive: electric (battery or mains), diesel, petrol, fuel gas Manufacturer’s type designition Manufacturer (abbreviation) Load centre distance Load distance, centre of drive axle to fork Service weight (max. battery) Axle loading, laden front/rear (max. battery) Axle loading, unladen front/rear (max. battery) Tyres: L = pneumatic, V = cushion, SE = Pneumatic Shape Solid Tyre size, front Tyre size, rear Wheels, number front/rear...

 Open the catalog to page 2
E1.6-2.0XN-3

TRUCK DIMENSIONS NOTE: Specications are affected by the condition of the vehicle and how it is equipped, as well as the nature and condition of the operating area. If these specications are critical, the proposed application should be discussed with your dealer. ¶ Bottom of forks ■ Without load backrest h6 subject to +/- 5 mm tolerance. Full suspension seat specied. 2.0 Stacking aisle width (line 4.34.1 & 4.34.2) is based on the VDI standard calculation as shown on illustration. The British Industrial Truck Association recommends the addition of 100 mm to the total clearance (dimension a) for...

 Open the catalog to page 3
E1.6-2.0XN-4

MAST AND CAPACITY INFORMATION Values shown are for standard equipment. When using non-standard equipment these values may change. Please contact your Hyster dealer for information NOTE: The rated capacities shown are for masts in a vertical position on trucks equipped with standard or sideshift carriage and nominal length forks. Masts above the maximum fork heights shown in the mast table are classified as high lift and, depending on the tyre/tread configuration may require reduced capacity, restricted back tilt or wide tread.

 Open the catalog to page 4
E1.6-2.0XN-6

PRODUCT FEATURES DEPENDABILITY New robust mast design provides excellent visibility The ergonomically designed operator compartment and reliable, high performance lifting. provides a comfortable and highly productive Strong chassis construction and reliable, long-lasting environment for the operator, offering generous foot components deliver excellent durability and stability, space and easy on/off access. increasing driver condence and enhancing productivity. Low noise and whole body vibration combined with a AC motor technology on traction and hoist, with built full suspension seat - with 80...

 Open the catalog to page 6
E1.6-2.0XN-7

■ Extended shift life reduces the need for battery recharging, saving time and money and increasing uptime. ■ The Vehicle System Manager (VSM) allows adjustment of truck performance parameters and monitors key functions, leading to application matched performance and minimum downtime. ■ Fast delivery of diagnostic information enables precise troubleshooting and easy maintenance planning and leads to lower operating costs. ■ Standard 1 000 hour service interval. ■ Service access is fast and unrestricted, with an easily removable two-piece floor plate providing access to brake fluid, hydraulic...

 Open the catalog to page 7
E1.6-2.0XN-8

STRONG PARTNERS. TOUGH TRUCKS. FOR DEMANDING OPERATIONS, EVERYWHERE. Hyster supplies a complete range of warehouse equipment, IC and electric counterbalanced trucks, container handlers and reach stackers. Hyster is committed to being much more than a lift truck supplier. Our aim is to offer a complete partnership capable of responding to the full spectrum of material handling issues: Whether you need professional consultancy on your eet management, fully qualied service support, or reliable parts supply, you can depend on Hyster. Our network of highly trained dealers provides expert, responsive...

 Open the catalog to page 8

All Hyster catalogs and brochures

  1. H8-12XM-6

    7  Pages

  2. H10-16XM-6-12

    7  Pages

  3. LO1.0-2.5

    13  Pages

  4. S6.0-7.0FT

    8  Pages

  5. A1.3-1.5XNT

    8  Pages

  6. J1.5-2.0XNT

    8  Pages

  7. C1.0-1.5

    5  Pages

  8. E2.2-3.5XN

    5  Pages

  9. E4.0-5.5XN

    8  Pages

  10. H1.6-2.0FTS

    5  Pages

  11. J1.6-2.0XN

    5  Pages

  12. J2.2-3.5XN

    5  Pages

  13. J4.0-5.5XN

    5  Pages

  14. K1.0L / M / H

    9  Pages

  15. LO2.0-2.5

    5  Pages

  16. H2.0-3.0XT

    5  Pages

  17. S4.0-5.5FT

    8  Pages

  18. S2.0-3.5FT

    8  Pages

  19. H1.6-2.0FT

    5  Pages

  20. Hyster range

    8  Pages

  21. Electrics Range

    24  Pages

  22. H2.0-3.5FT

    14  Pages

  23. Warehouse Range

    24  Pages

  24. H16-18XM(S)-12

    16  Pages

  25. H8-16XM-6

    20  Pages

  26. H8.0-9.0FT

    8  Pages

  27. H6.0-7.0FT

    8  Pages

  28. H4.0-5.5FT

    16  Pages

  29. H2.0-2.5CT

    8  Pages

  30. H36-48XMS

    16  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.