UltraLift-2

Product catalog summary

Overview: The document provides detailed specifications and features of the HydroHoist UltraLift2 series boat lifts, including the Shallow Water Lift and Front Mount models. These lifts are designed for various watercraft sizes and types, offering durable construction and innovative features to enhance longevity and performance.

Shallow Water Lift:

Designed for operation in water depths of at least 3 feet.
Features a longer polyethylene tank with a low profile to minimize corrosion.
Standard features include a 5,000 lbs. capacity, 10 ft. slip minimum, and adjustable tank placement.
Recommended for boats up to 5,000 lbs. and 28' in length, suitable for inboard or stern drive installations.

UltraLift2 Series:

Manufactured with polyethylene tanks for marine environments, featuring the patent-pending UltraGrip™ tank connection.
Standard features include heavy-duty construction, all steel parts above water, and hot-dip zinc-galvanized structural steel.
Technical specifications vary by model, with lifting capacities ranging from 4,400 lbs. to 28,000 lbs.
Recommended for boats up to 47' in length, with options for drive-in or back-in installations.

Front Mount Models:

Designed for double-berth slips and L-shaped moorings, allowing space for additional watercrafts.
Standard features include ultra-tough polyethylene tanks and superior marine-grade hardware.
Technical specifications include lifting capacities of 4,400 lbs. to 6,600 lbs., with minimum water depths of 7 ft.
Recommended for boats up to 26' in length and suitable for extra-wide slips.

Key Features Across Models:

Heavy-duty construction with precision-designed, high-impact polyethylene tanks.
All steel parts are positioned above water to prevent rust and marine growth.
Adjustable hull support and Grade 8 pivot hardware for enhanced stability and durability.
Custom options available for hull pads and mooring hardware.

Catalog excerpts

©2009 HYDROHOIST MARINE GROUP The Shallow Water Lift™ incorporates a longer polyethylene tank with a lower profile to allow for operation in water depth of at least 3 feet. Constructed of durable polyethylene that is impact and puncture resistant. Similar in design to the UltraLift2™, the Shallow Water Lift has been engineered to keep the galvanized steel components on the top side of the tank, minimizing corrosion and maximizing the life of your lift. STANDARD FEATURES • Low profile molded polyethylene tanks • Adjustable tank placement • All major steel components out of water • Made for applications in as little as 3-feet of water • Two-piece stainless/polyethylene pitman bushings • Grade 8 pivot hardware' .- • All cast parts are HSLA steel • Boats up to 28' overall length • Inboard or stern drive • Drive-in installation • Floating docks and U-shaped slips SHALLOW WATER TECHNICAL SPECS Your authorized HydroHoist dealer is: ULTRALIFT2" SHALLOW WATER SPECIFICATIONS 22 inches plus hull draft MARINE CROUP HydroHoist Boat Lifts • HyPower • Rotek CORPORATE OFFICE 915 West Blue Starr Drive [email protected] • boatlift.com BOAT LIFTS Keep your boat safe, clean . BOAT LIFTS 's #1 Choice for Boat Lifts & Accessories a-successful line boat-lifting products. Our boat lifts are manufactured using polyethylene tanks designed specifically modeled, molded and shaped for seamless efficiency and safety. Another unique feature is the patent pending UltraGrip™ tank connection, installed with all steel parts above water.* This innovative concept protects your boat lift against rust and marine growth for years of convenient and carefree storage. "Standard installation

Open the catalog to page 1

STANDARD FEATURES • Heavy-duty construction • Precision-designed, custom- molded, high-impact polyethylene tanks • All steel parts above water* • Hot-dip, zinc-galvanized structural steel frame and • Full-width 4" frame channel with 3" adjustable expansion channel • Heavy-duty 1/4" thick torsion bars • Heavy-duty structural-grade dock brackets with molded bumper • Boat-side, padded-step pitmans* square-hole bushings • Two-piece stainless/polyethylene pitman bushings • Heavy-duty hull support system • Grade 8 pivot hardware • All cast parts are High-Strength Low Alloy (HSLA) steel • Boats up to...

Open the catalog to page 2

UltraLift-2

UltraLift-2

Catalog excerpts

All HydroHoist catalogs and brochures

Archived catalogs