- Catalogs
- HydroHoist
- Front Mount UltraLift-2
Front Mount UltraLift-2
Front Mount UltraLift-2
- Designed for operation in water depths of at least 3 feet.
- Features a longer polyethylene tank with a lower profile.
- Galvanized steel components are positioned above the tank to minimize corrosion.
- Standard features include a 5,000 lbs. capacity, 10 ft. slip minimum, and adjustable tank placement.
- Recommended for boats up to 5,000 lbs. and 28' in length.
- Manufactured with polyethylene tanks for marine environments.
- Includes the patent-pending UltraGrip™ tank connection for installation with steel parts above water.
- Standard features include heavy-duty construction, high-impact polyethylene tanks, and hot-dip zinc-galvanized steel frame.
- Available in various lifting capacities from 4,400 lbs. to 28,000 lbs.
- Recommended for boats up to 47' in length and 28,000 lbs.
- Shallow Water Lift: Minimum water depth of 22 inches plus hull draft, tank size of 15" x 40" x 16'-9".
- Front Mount Models: Designed for double-berth slips and L-shaped moorings, with lifting capacities up to 6,600 lbs.
- UltraLift2 Series: Various models with different lifting capacities and tank sizes, suitable for different slip widths and water depths.
- Suitable for inboard or stern drive boats.
- Compatible with floating docks and U-shaped slips.
- Custom hull pads and mooring hardware available for special applications.
Catalog excerpts
©2009 HYDROHOIST MARINE GROUP The Shallow Water Lift™ incorporates a longer polyethylene tank with a lower profile to allow for operation in water depth of at least 3 feet. Constructed of durable polyethylene that is impact and puncture resistant. Similar in design to the UltraLift2™, the Shallow Water Lift has been engineered to keep the galvanized steel components on the top side of the tank, minimizing corrosion and maximizing the life of your lift. STANDARD FEATURES • Low profile molded polyethylene tanks • Adjustable tank placement • All major steel components out of water • Made for applications in as little as 3-feet of water • Two-piece stainless/polyethylene pitman bushings • Grade 8 pivot hardware' .- • All cast parts are HSLA steel • Boats up to 28' overall length • Inboard or stern drive • Drive-in installation • Floating docks and U-shaped slips SHALLOW WATER TECHNICAL SPECS Your authorized HydroHoist dealer is: ULTRALIFT2" SHALLOW WATER SPECIFICATIONS 22 inches plus hull draft MARINE CROUP HydroHoist Boat Lifts • HyPower • Rotek CORPORATE OFFICE 915 West Blue Starr Drive [email protected] • boatlift.com BOAT LIFTS Keep your boat safe, clean . BOAT LIFTS 's #1 Choice for Boat Lifts & Accessories a-successful line boat-lifting products. Our boat lifts are manufactured using polyethylene tanks designed specifically modeled, molded and shaped for seamless efficiency and safety. Another unique feature is the patent pending UltraGrip™ tank connection, installed with all steel parts above water.* This innovative concept protects your boat lift against rust and marine growth for years of convenient and carefree storage. "Standard installation
Open the catalog to page 1
STANDARD FEATURES • Heavy-duty construction • Precision-designed, custom- molded, high-impact polyethylene tanks • All steel parts above water* • Hot-dip, zinc-galvanized structural steel frame and • Full-width 4" frame channel with 3" adjustable expansion channel • Heavy-duty 1/4" thick torsion bars • Heavy-duty structural-grade dock brackets with molded bumper • Boat-side, padded-step pitmans* square-hole bushings • Two-piece stainless/polyethylene pitman bushings • Heavy-duty hull support system • Grade 8 pivot hardware • All cast parts are High-Strength Low Alloy (HSLA) steel • Boats up to...
Open the catalog to page 2All HydroHoist catalogs and brochures
HarborHoist2 Pages
HydroHoist Master Caralog2 Pages
UltraLift2 Series2 Pages
Archived catalogs
HydroPort-2 PWC2 Pages
HydroHoist Catalogue 200920 Pages
UltraLift-22 Pages
HydroHoist Catalog11 Pages