Tooling Selector Valve Compact & lightweight @ only 1.7kg (3.7lb) Constructed from corrosion resistant materials Suitable for all types of industrial, marine or subsea applications Product Overview The HLK-60120 tooling selector valve is a cost effective and lightweight solution for the control of hydraulic tooling. Rated for an operational depth 3000msw, it is ideally suited for use on all types of submersible systems. The standard configuration utilises a single bi-directional solenoid valve with a full open port centre stage to allow an open centre flow path in the idle state that provides a system or pump unload function to aid in power management within the hydraulic system power architecture. Other valve types are available on request.

HLK-60120 Tooling Selector Valve Product Specifications General Number of Valves Valve Type(s) Materials Product Finish Work Ports Compensation Ports Dimensions Weight in Air (kg) Weight in Water (kg) Electrical Connector Type & Pin 4/3 DCV Solenoid Spool Cartridge 6082 Aluminium Hard Anodised 1/4" BSPP (ISO 1179) 7/16” SAE (SAE J1926-1) (H) 208mm x (D) 68mm (8.2" x 2.7") 1.7kg (3.7lb) 1kg (2.2lb) Subconn MCBH3M 3 Pin Hydraulic Performances Max. Working Pressure Flow (lpm) Fluid Type Viscosity Fluid Temperature Cleanliness Requirements Electrical Supply Voltage 24Vdc Communications Direct to...