Catalogs >
Hydro-Lek >
HLK 60110

HLK 60110
2Pages

Catalog excerpts

Tooling Selector Valve Compact & lightweight @ only 1.8kg (2.86lb) Constructed from corrosion resistant materials Suitable for all types of industrial, marine or subsea applications Product Overview The HLK-60110 tooling selector valve is a cost effective and lightweight solution for the control of hydraulic tooling. Rated for an operational depth 3000msw, it is ideally suited for use on all types of submersible systems. The standard configuration utilises a single bi-directional solenoid valve with a tandem centre stage to allow an open centre flow path in an idle state that provides a system or pump unload function to aid in power management within the hydraulic system power architecture. Other valve types are available on request.

Open the catalog to page 1

HLK-60110 Tooling Selector Valve Product Specifications General Number of Valves Valve Type(s) Materials Product Finish Work Ports Compensation Ports Dimensions Weight in Air (kg) Weight in Water (kg) Electrical Connector Type & Pin Hydraulic Performances Max. Working Pressure Flow (lpm) Fluid Type Viscosity Fluid Temperature Cleanliness Requirements 4/3 DCV Solenoid Spool Cartridge 6082 Aluminium Hard Anodised 3/8" BSPP (ISO 1179) 7/16” SAE (SAE J1926-1) (H) 270mm x (D) 75mm (10.6” x 2.9”) 3.1kg (6.8lb) 1.8kg (2.86lb)_ Electrical Supply Voltage 24Vdc Communications Direct to Coil...

Open the catalog to page 2

HLK 60110 2Pages

Catalog excerpts

All Hydro-Lek catalogs and brochures

HLK 60110
2Pages