6 degrees of freedom manipulator Compact & lightweight @ 20.2kg (44.4lb) Lift of 32Kg at full reach Continuous wrist rotate and a jaw opening of 154mm (6") Incorporates a 19mm rope cutter Product Overview The HLK-5300 manipulator is a 6 Function rate controlled manipulator making use of an HLK-25000 jaw rotate offering continuous rotation on the wrist and a jaw opening range of 154mm (6") and a softline cutting capability of 19mm (3/4”) from the back side of the jaw plates. This manipulator was specifically developed for use on light duty work class vehicles and manned submersibles to provide manipulation capabilities and is ideal for applications such as jetting and brushing operations, debris clearance, valve turning and bolt torqueing, rope cutting, cable repair, biological and geological sampling, archaeological work, transponder and probe installation, salvage and recovery

Product Specifications General Degrees of Freedom Control Type Materials Seal Materials Product Finish Dimensions Weight in Air Weight in Water Maximum Reach Wrist T ravel Jaw Opening Rate Controlled 316 Stainless Steel, 6082 Aluminium, HDPE Nitrile/NBR/Buna-N, PTFE Hard Anodised, Painted 1/8" BSPP (ISO 1179) 7/16" SAE (SAE J1926-1)_ Hydraulic Performances Max. Working Pressure Flow Fluid Type Viscosity Fluid Temperature Cleanliness Requirements Soft Rope Cutting Diameter 19mm (3/4") Lift at Full Extension 32kg (70lb) Environmental Operational Depth 6000msw (19,680ft) SAAB SEAEYE Email: [email protected]...