5 degrees of freedom manipulator Compact & lightweight @ 9.6kg (21.1lb) in water Lift of 25Kg at full reach Wrist rotate range of 180O and a jaw opening of 154mm (6") Incorporates 19mm soft rope cutter Product Overview The HLK-4000 manipulator is a 5 Function rate controlled manipulator making use of an HLK-2010 jaw rotate offering 180 degree rotation on the wrist and a jaw opening range of 154mm (6") and a softline cutting capability of 19mm (3/4”) from the back side of the jaw plates. This manipulator was specifically developed for observation to light duty work class vehicles to provide manipulation capabilities and is ideal for jetting and brushing operations, debris clearance, valve turning and bolt torqueing, rope cutting, cable repair, biological and geological sampling, archaeological work, transponder and probe installation, salvage and recovery

Product Specifications General Degrees of Freedom Control Type Materials Seal Materials Product Finish Dimensions Weight in Air Weight in Water Maximum Reach Wrist Travel Jaw Opening Rate Controlled 316 Stainless Steel, 6082 Aluminium Nitrile/NBR/Buna-N, PTFE Hard Anodised, Painted 1/8" BSPP (ISO 1179) 7/16" SAE (SAE J1926-1)_ Hydraulic Performances Max. Working Pressure Flow Fluid Type Viscosity Fluid Temperature Cleanliness Requirements Soft Rope Cutting Diameter 19mm (3/4”) Lift at Full Extension 25kg (55lb) Environmental Operational Depth 6000msw (19,680ft) SAAB SEAEYE Email: [email protected]...