Features • Low speed, high torque motor capable of delivering 60Nm @ 140bar (44.25lbf.ft @ 2000psi) • Soft rope cutting blades available as standard Product Overview The HLK-25000 manipulator jaw rotate was developed as a standard fit for all medium duty manipulators available within the Hydro-Lek range of manipulators but can be retrofitted to any system requiring a jaw rotate function or mechanism. The rotate function uses an industry standard hydraulic orbital motor to drive within the main housing body and a double acting cylinder to open and close the jaw assembly. The low speed, high torque hydraulic motor can deliver a continuous torque of 60Nm @ 140bar (44.25lbf.ft @ 2000psi) and the jaw mechanism can exert a compressive force of 630N @ 140bar (141.63lbf @ 2000psi). Welded into each jaw tine is a pair of circular cutting blades to provide a soft rope cutting capability up to 19mm (3./4”) and a cross drilling of 12.7mm (1/2”) is available for the gripping of t-handles or other types of ROV tooling handles.

Product Specifications General Function Materials Seal Materials Product Finish Ports Dimensions Weight in Air Weight in Water Wrist Travel (Degree) Jaw Opening T-Handle Groove Diameter Jaw & Wrist Rotate 316 Stainless Steel, 6082 Aluminium Nitrile/NBR/Buna-N, PTFE Hard Anodised 7/16" SAE (SAE J1926-1) (L) 428mm x (W) 116mm x (D) 75mm (16.8” x 4.6” x 3) 7.5kg (16.53lbs) 5.92kg (13lbs)_ Hydraulic Performances Max. Working Pressure 140bar (2000psi) Fluid Type Mineral: DIN 51524, ISO 11158, ISO 6743-4 Synthetic: Panolin Atlantis, HLP-Synth Viscosity 16cSt to 220cSt. VG 22-32 Recommended Soft Rope...